Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 04-22-2014, 05:32 PM
Dirt Dawg Dirt Dawg is offline
Member
 
Join Date: Mar 2014
Posts: 3
Default oil Fill plug. 2001 EC250

wondering if anybody can help me figure out a replacement for the oil "fill" plug on a 2001 EC250. Mine was somewhat stripped. I got it out but prefer to replace it with a new one. Cant seem to find any crossover on that part and cannot find the part here in New Jersey.


Reply With Quote


  #2  
Old 04-22-2014, 05:35 PM
Fred1956's Avatar
Fred1956 Fred1956 is offline
Senior Member
 
Join Date: Oct 2009
Location: NW Arkansas
Posts: 1,254
Default

Quote:
Originally Posted by Dirt Dawg View Post
wondering if anybody can help me figure out a replacement for the oil "fill" plug on a 2001 EC250. Mine was somewhat stripped. I got it out but prefer to replace it with a new one. Cant seem to find any crossover on that part and cannot find the part here in New Jersey.
GoFasters or I bet Steve at Afterhours has them. BTW I use the drain plug for the fill as well as the drain, gives me 2 magnets in the oil ME25610017 is the GG part number
__________________
Fred Overstreet
2010 EC250 SixDays
2004 GasGas EC300 -Sold to a good home
2006 GasGas EC250-Sold to a good home
2006 GasGas TXT 280 Pro
Reply With Quote
  #3  
Old 04-22-2014, 08:35 PM
gasgasman's Avatar
gasgasman gasgasman is offline
Super Moderator
 
Join Date: Jul 2006
Location: Pearland Texas
Posts: 4,594
Default

You can visit your local friendly Ford dealer and speak to one of their diesel techs.
Tell him you want a high pressure oil pump plug.

Or, I can send you one. They are metal with an o-ring built in. No magnet.
Reply With Quote
  #4  
Old 04-22-2014, 09:42 PM
Dirt Dawg Dirt Dawg is offline
Member
 
Join Date: Mar 2014
Posts: 3
Default

Thanks so much. I like the idea of using two drainplugs!
Reply With Quote
  #5  
Old 04-23-2014, 07:28 AM
nknudsen's Avatar
nknudsen nknudsen is offline
Senior Member
 
Join Date: Oct 2012
Location: SE Minnesnowta
Posts: 722
Thumbs up

Quote:
Originally Posted by gasgasman View Post
You can visit your local friendly Ford dealer and speak to one of their diesel techs.
Tell him you want a high pressure oil pump plug.

Or, I can send you one. They are metal with an o-ring built in. No magnet.
Great tip and easy to find. Thanks!
__________________
Noah
2000 EC250 with 2011 transformation kit, KYB SSS forks, MN street title
16' Ski-Doo XS Renegade X 1200 4T
16' Specialized Fatboy trail
02' ZRX 1200r R.I.P.
72' Olds 500ci, Batten Heads, Street/Drag car, former CarCraft magazine centerfold (has-been)
15' TW200
Reply With Quote
  #6  
Old 04-23-2014, 10:52 AM
Leo's Avatar
Leo Leo is offline
Senior Member
 
Join Date: Sep 2008
Posts: 499
Default

any M12x1,5 plug will fit.
__________________
www.endurohp.eng.br
Sherco ST300 2015 (Trials)
https://www.instagram.com/leocm74/
Brasil!
Reply With Quote
  #7  
Old 04-23-2014, 06:47 PM
noobi's Avatar
noobi noobi is offline
Senior Member
 
Join Date: Sep 2008
Location: New Zealand
Posts: 1,031
Default

Quote:
Originally Posted by Leo View Post
any M12x1,5 plug will fit.
Yea, which is also the same as the KTM drain plug. Its not the ideal shape for a drain plug as it sticks out from flush with the case, but is ok for a fill plug. Its a proper bolt, instead of a recessed cap screw.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
2001 Gas Gas EC250 rsteiger General Discussions & Announcements 11 01-17-2018 12:22 PM
EC250 - Damaged piston or plug? JMAN Enduro Engine - 2 stroke 7 01-24-2014 09:50 AM
Drain and Fill Dude Enduro Engine - 2 stroke 1 04-24-2011 06:21 PM
Looking at a 2001 EC250 sahzooki General Discussions & Announcements 2 06-12-2009 10:47 PM
2001 EC 250 plug issues HELP Silver Enduro Engine - 2 stroke 14 08-08-2007 03:38 PM




All times are GMT -5. The time now is 03:35 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org