#1
|
|||
|
|||
Bill of materials for bottom end rebuild.
Just in-case anyone might benefit from it, copied from my post on the GGriders facebook group.
? = GBP, this forum doesn't seem to recognise our stronger currency 2006 EC300 Gasket set, ?47 eBay Bearings - http://simplybearings.co.uk 1 x Major Branded 63/28C3 Open Type Deep Groove Ball Bearing 28x68x18mm (RIGHT HAND CRANK BEARING) ?18.35 1 x SKF NJ206ECPC3 Single Row Cylindrical Roller Bearing 30x62x16mm (LEFT HAND CRANK BEARING) ?28.21 1 x 20x35x6mm TC / R23 Double Lip Viton Rubber Metric Rotary Shaft Oil Seal with Garter Spring (LEFT HAND CRANK SEAL) ?9.11 2 x Major Branded 608C3 Open Type Deep Groove Ball Bearing 8x22x7mm (POWER VALVE BEARING) ?5.00 1 x FAG 6000C3 Open Type Deep Groove Ball Bearing 10x26x8mm ?2.40 (POWER VALVE BEARING) 1 x 38x52x7mm TC / R23 Double Lip Viton Rubber Metric Rotary Shaft Oil Seal with Garter Spring (RIGHT HAND CRANK SEAL) ?10.51 Total - ?88.30 Crank is being rebuilt by http://pjme.co.uk/ Using conrod kit from an early model CR250 (mikata brand), parts inc postage/labour etc is about ?95, haven't received it yet. (mitaka kit comes with piston pin and small end bearing). So for my rebuild, ?225 approx. Piston kit is about ?100 - ?130 dependant on brand. Cylinder reline has gone up to ?130 for single barrel now was ?90 last one I had done 4 years ago. http://www.bdkraceeng.co.uk/Replates.htm claim ?89.50+vat for replate. http://www.poetonaptec.co.uk/cylinder-repair.htm quote ?130, or ?160 for cylinders requiring repair.
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear 2016 RM-Z450 |
#2
|
||||
|
||||
Might have to use is soon thanks for posting this mate !!
|
#3
|
|||
|
|||
also langcourt are recommended
__________________
03 ec300 honda cr500 94 |
#4
|
||||
|
||||
Dont forget S-3 will replate/rebuild your cylinder.
__________________
'12 XC 200 TTX Sold '15 XC 250E Sale pending |
#5
|
|||
|
|||
Not thought about s3, got a link?
Got the crank back from home, very happy indeed! ?88.88!
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear 2016 RM-Z450 |
#6
|
||||
|
||||
sorry no link, google S-3 that's what I did.
__________________
'12 XC 200 TTX Sold '15 XC 250E Sale pending |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Bottom end rebuild | Jakobi | Enduro Engine - 2 stroke | 41 | 02-18-2016 12:02 PM |
'05 125 bottom end | marshalls113 | Parts | 0 | 04-14-2014 08:16 PM |
Bottom end bearings | Rabbitist | Enduro Engine - 2 stroke | 1 | 04-03-2012 03:58 PM |
Senate Bill to Overturn Ban on Youth ATVs and Dirt Bikes Introduced! | eff | General Discussions & Announcements | 1 | 03-25-2009 04:28 PM |
ARRA Alert: Please Help Defeat Senate Bill 1139 | Jim Cook | General Discussions & Announcements | 0 | 10-15-2007 10:55 AM |