|
General Discussions & Announcements General Announcements, General Questions, e.g. What bike do I buy?, etc. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
front and rear sprocket '07 ec 300
I'm in the need for a front and rear sprocket for my '07 ec 300,is there any cross overs or do i need to buy oem ???
|
#2
|
||||
|
||||
The rears are easy. Ironman, Supersprox, and Moose all have them. The Moose is the least expensive at about $50, it's aluminum and seems high quality enough. The Supersprox is about $80, the Ironman $130. (all retail pricing)
The front I have not found a crossover for, but I know that Talon and Renthal are both available, only through the dealer. I can look up the part number on the renthal package I saved at home and post the part number, but I don't know that you'll be able to get it directly because they don't list it on their site. Fortunately the front sprocket is fairly low price, even at dealer cost, though it is double what you'd think.
__________________
Mike Sheetz OMRA #21AA What will I be riding next? Christini GG 300? '15 KTM 300 XC-W '08 EC 250 (Gone to new happy owner) Gran Prix Cycle LTR Suspension RB-Designs |
#3
|
||||
|
||||
thanks roostafish.....any help would be appreciated. when you say dealer,do you mean gasgas dealer or any bike shop???
|
#4
|
||||
|
||||
also looking for a throttle cable too.
|
#5
|
||||
|
||||
Ironman does have a front sprocket...12,13,14 teeth.
http://www.dirttricks.com/ordering_sprockets.htm
__________________
2006 Gas Gas EC250 2011 Husaberg FE390 |
#6
|
||||
|
||||
AFAM make nice sprockets as well get them here!
Give them a call, GasGas is not listed, however the rear pattern is a Husky crossover. http://www.sprocketcenter.com/
__________________
Rick 99 EC 200 06 RM 250 AMA D36 375X OTHG 375S ***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals |
#7
|
||||
|
||||
call gofasters for the throttle cable, and get the +1.5 inch one. there arnt any cross overs because we have a special bend that comes off the carb to accommodate the gas tank, whereas a ktm or honda do not. at least thats the only reason i can think of, the ktm uses the same throttle tube and carb, but the top of the carb is different on ours.
__________________
03 ec250 hyde skidplate, cycra handguads, protaper contours "what? it seemed like a good idea at the time!" |
#8
|
||||
|
||||
I just bought a set of front and rear sprockets from Scotties. Supersprox part numbers are:
Rear: 1512(11s-415-47r is also on the package) Front: 10-GG1-13(95-GG113 also on package) This was for a 47 tooth rear and 13 tooth front. I also bought a DID 520 VM chain too. Hope this helps mate. Cheers Mark |
#9
|
||||
|
||||
When I say dealer, I meant Gas Gas dealer, which I understand are fairly scarce. I'm lucky to have the best dealer of any bike brand just 40 miles away, who happens to carry Gas Gas. He's truly the reason I'm still riding a Gas Gas. Gran Prix Cycle is the name of the shop, in Oregon. He even has stuff on the shelf, no waiting for orders. (541) 926-3139
Renthal front sprocket part number: 360A-520-13P Pretty simple. It even says Gas Gas on the label.
__________________
Mike Sheetz OMRA #21AA What will I be riding next? Christini GG 300? '15 KTM 300 XC-W '08 EC 250 (Gone to new happy owner) Gran Prix Cycle LTR Suspension RB-Designs |
#10
|
||||
|
||||
And here I always thought I had the best dealer around. I might have to call ya on that one....
__________________
HuskyDude 10 EC300XC 08 TE510 07 TXT 280 77 TY175 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Front sprocket? | wence | Enduro Chassis & Body | 8 | 09-18-2010 02:12 AM |
14 tooth front sprocket | sierrarider | General Discussions & Announcements | 11 | 02-12-2009 09:43 AM |
FSE 450 W/ 14t Front sprocket??? | cal_tony | Enduro Chassis & Body | 5 | 12-09-2008 09:47 AM |
Front sprocket cross over | Silver | General Discussions & Announcements | 3 | 09-03-2008 08:53 PM |
14 t front sprocket on 300 EC 2007 | Blatchy | Enduro Engine - 2 stroke | 0 | 11-01-2007 04:30 PM |