|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Rear sprocket compatibility
I have a 2015 ec300 and I'm after a rear sprocket
I wondered if there is any compatibility from other brands and of older gasgas rear sprockets fit Thanks in advance |
#2
|
||||
|
||||
Gasgas has used the same sprockets for a long time. My 06 and 15 models use the same sprockets. The sprockets also fits some Italian Husqvarnas. Do a quick search on ebay and you fill find them there.
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#3
|
|||
|
|||
Perfect thanks very much I could see earlier listed but all seemed to say 02-13
Thanks again Ben |
#4
|
||||
|
||||
I have owned 99, 01, 07, and 2011 gassers all used the same rear sprockets. All gassers (except trials and the ec 125) use the same front sprocket. The ec125 front sprocket is probably the same as a Yamaha yz 125. I have used a suzuki 250 rear sprocket (91-93 DR 250/350 but must be the "s" model - regular dr 250 won't fit).
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rear sprocket | alang | Enduro Chassis & Body | 1 | 08-03-2017 05:45 PM |
WTB Rear Sprocket | pscook | "Wanted to Buy" & "Want To Trade" | 2 | 03-02-2016 07:42 AM |
Rear sprocket | gwnz | Other GasGas Bikes/Quads | 2 | 06-20-2014 03:30 PM |
Rear sprocket | steve | Enduro Chassis & Body | 7 | 01-22-2009 07:38 AM |
SM ing With MY 36t Rear Sprocket. | cal_tony | Enduro Chassis & Body | 1 | 12-30-2008 11:39 AM |