|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
2009 450fsr sachs shock rebuild kit
Anyone know where I can get all the parts to service a Sachs shock on a 2009 450fsr? In the States if possible.
Thx |
#2
|
|||
|
|||
i used a skf seal block on a 010 two stroke one or look to see if racetech do a block did look at fitting a different seal to the std block showa kyb wp use the same seal on there 18 mm shock good luck
|
#3
|
||||
|
||||
Quote:
Getting a seal or complete seal head for a Sachs can be a pain in the ringbit... Most tuners will mill the stock seal head to take a KYB/Showa seal, otherwise SKF do a complete seal head. You just need to be sure on which one you need. Sachs use 16 and 18mm shafts.. some use top out spring assemblies, while others have a bump stop on the seal head. Few different height seal heads getting around too! |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2009 450FSR valve specs | schlitzy | Enduro Engine 4 stroke (including EFI & Exhaust) | 2 | 04-07-2016 08:46 PM |
2009 ec300 sachs suspenders | Diggs345 | Enduro Suspension | 8 | 04-27-2012 01:08 PM |
2009 SACHS Shock Question | 300XCRider | Enduro Suspension | 4 | 02-16-2011 07:59 PM |
Sachs shock rebuild. | nick790 | Enduro Suspension | 1 | 05-31-2010 09:52 PM |