GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Electrical & Wiring

Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 04-29-2010, 04:27 PM
Brian's Avatar
Brian Brian is offline
Senior Member
 
Join Date: Aug 2009
Location: Los Gatos, CA
Posts: 306
Default 2k-3 Swap and adding headlight

So I am going to swap the 2k-2 I have on my bike (2006 EC250) for a 2k-3 as well as add a headlight. So I thought I would document with pictures, wiring etc in a thread.

Parts List:
2k-3 stator
Regulator/Rectifier Trail Tech Part #7003-RR150
3 position switch w/Kill Switch Trail Tech Part #040-HBS-02
X2 Halogen Head Light Trail Tech Part #36T2-70
Flywheel Puller Motion Pro Part #08-0026
Battery Turn Tech 2.5 Ahr Battery

LED tail light; rear fender seems pretty floppy already. Is a tail light just going to make it a lot worse? How do you mount it? Suggestion on which one?

What am I forgetting in my parts list?

Thanks


__________________
2006 Gas Gas EC250
2011 Husaberg FE390

Last edited by Brian; 05-05-2010 at 08:49 PM.
Reply With Quote


  #2  
Old 04-30-2010, 04:46 AM
eff's Avatar
eff eff is offline
Silver Level Site Supporter
 
Join Date: Jul 2006
Location: RI
Posts: 1,757
Default

Since you are adding a battery i assume you are planning to convert from an AC to DC system?
__________________
2004 GasGas DE250
Reply With Quote
  #3  
Old 04-30-2010, 06:25 AM
slocalspode's Avatar
slocalspode slocalspode is offline
Senior Member
 
Join Date: Mar 2007
Location: Southern Kalifornia
Posts: 432
Default

If you are going trailTech. You might want to look into
getting a whole kit. Something like this.
http://www.trailtech.net/ktm_s-8311_kits.html
You get a stator already with the floating ground mod.
for DC output.
I did this mod on my '02 XC300 a couple of years ago.
As for the floppy rear fender. Do you have the sub-frame
loop support under the fender?
Keep us up to date on your progress.
Jeff
Reply With Quote
  #4  
Old 04-30-2010, 01:35 PM
Brian's Avatar
Brian Brian is offline
Senior Member
 
Join Date: Aug 2009
Location: Los Gatos, CA
Posts: 306
Default

I bought a rewound 2k-3 from widebear in November. So I already have one...if I'm not mistaken I think its already setup for DC, floating ground. But I will have to verify.
__________________
2006 Gas Gas EC250
2011 Husaberg FE390
Reply With Quote
  #5  
Old 04-30-2010, 02:49 PM
slocalspode's Avatar
slocalspode slocalspode is offline
Senior Member
 
Join Date: Mar 2007
Location: Southern Kalifornia
Posts: 432
Default

I think you are right. I remember that one for sale and was thinking
of picking that one up from him also. If I remember correctly I got
my 2K3 from him a few years ago, but, it did not have the mod
done to it yet.
Are you going to set your's up with turn lights, brake lights,
hi-lo beam etc...?
If so. You have to replace the Leonelli AC flasher with a DC flasher.
I use oned from an auto parts store. I also had to swap the orange
and black wire on the flasher module connector.

You can swim throught here for a couple of more pictures of my EC300
http://s288.photobucket.com/albums/l...alSpode/ec300/
It shows my battery set up and the 2K3 post floating ground mod.

It is the yellow wire with the shrink tubing in the above picture.
I think most of this was covered in the "HOw to go DC" thread.
Good luck with your upgrades.
Jeff, So Cal.
Reply With Quote
  #6  
Old 05-03-2010, 10:04 PM
Brian's Avatar
Brian Brian is offline
Senior Member
 
Join Date: Aug 2009
Location: Los Gatos, CA
Posts: 306
Default

Quote:
Originally Posted by slocalspode View Post
As for the floppy rear fender. Do you have the sub-frame
loop support under the fender?
Do you mean part #53?
http://www.gofasters.com/images/FRAME-06.jpg
Pretty sure I don't. I think that would help.
Quote:
Originally Posted by slocalspode View Post
Are you going to set your's up with turn lights, brake lights,
hi-lo beam etc...?
If so. You have to replace the Leonelli AC flasher with a DC flasher.
I use oned from an auto parts store. I also had to swap the orange
and black wire on the flasher module connector.
I'm thinking hi-lo, brake light. Only thinking brake light for the rear visibility at night, might be a good idea.

Thanks for the tips. Hope to get into this very soon.
__________________
2006 Gas Gas EC250
2011 Husaberg FE390
Reply With Quote
  #7  
Old 05-04-2010, 07:26 AM
slocalspode's Avatar
slocalspode slocalspode is offline
Senior Member
 
Join Date: Mar 2007
Location: Southern Kalifornia
Posts: 432
Default

Yes, part # 53. It will make the rear fender much stronger.
You might try posting "WTB" add here and see if anyone has
a spare to sell.
Good luck and lets see some picts when you get done.
Jeff
Reply With Quote
  #8  
Old 10-05-2010, 08:05 PM
Brian's Avatar
Brian Brian is offline
Senior Member
 
Join Date: Aug 2009
Location: Los Gatos, CA
Posts: 306
Default

Finally making some progress on this...
Have the stators swapped. Ran it for a few seconds and it seems good. However I read that you can change the timing based on the orientation so I better double check that. Still need to get some stuff to wire everything up and figure out what to do about mounting the battery.

2k-2

2k-3

Schematic


I'll put up a better schematic later. Still should find some sort of LED strip I can glue under the fender....
__________________
2006 Gas Gas EC250
2011 Husaberg FE390
Reply With Quote
  #9  
Old 10-06-2010, 07:21 AM
widebear's Avatar
widebear widebear is offline
Banned
 
Join Date: Nov 2006
Location: Kamloops B.C.
Posts: 723
Default

Looks good.That stator was rewound as well, prob could cook your thanksgiving turkey with what it puts out.
Reply With Quote
  #10  
Old 10-06-2010, 07:23 AM
slocalspode's Avatar
slocalspode slocalspode is offline
Senior Member
 
Join Date: Mar 2007
Location: Southern Kalifornia
Posts: 432
Default

Excellent. Keep us updated with your progress.
I wish your 2K3 stator picture was in better focus.
It does not look the same as the one I did.
Your yellow wire looks like it is still soldered to
the terminal at the top. I can't tell if one of the
winding wires have been cut and attached to
the yellow wire. (see my picture for ref)
I wonder if the (floating ground mod) has
been done to this stator? Just curious.
Jeff.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Radiator Swap With KTM? stvbird Enduro Engine - 2 stroke 5 09-18-2010 03:00 AM
kickstart swap Trailrider General Discussions & Announcements 9 07-29-2010 12:33 PM
Adding another gasser to my stable joey11 General Discussions & Announcements 0 05-15-2008 12:11 PM




All times are GMT -5. The time now is 04:02 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org