Am I nuts? 1999 EC 250

[hadfield4wd]

So to confirm they are WP 50mm extremes. I'm really stoked this bike is great. I'm looking for shorty levers. I found where I can get them from ajpamerica.com for the clutch but I have a brembo front brake. Should I just get any KTM lever?

[Zman]

Congrats! That bike should bring you many smiles for years to come!

[wrench]

Originally Posted by firffighter

Wow you don't waste any time!

Looking forward to watching the build and a ride report!

If you locate graphics, could you please post. Our '99 EC200 had new ones when we bought it, but I'd like an extra set for down the road.

http://graphicmx.com/gg01shroud.shtml

They have the templates and can do custom designs as well.

[hadfield4wd]

My buddy is a graphic artist and I sent him detailed pictures and I peeled off the graphic i had and sent it to him to match the colors. Then he has a guy who will print it for him. Somehow he got the templates

[wrench]

Probably from this place. They will sell you the templates/files for a reasonable price.

[RBrider]

Originally Posted by hadfield4wd

So to confirm they are WP 50mm extremes. I'm really stoked this bike is great. I'm looking for shorty levers. I found where I can get them from ajpamerica.com for the clutch but I have a brembo front brake. Should I just get any KTM lever?

I've got a AJP clutch and Nissin brake. I got a pair of either Moose or MSR (can't remember which) off Ebay. They're short enough to fit well inside the barkbusters and work well. Cheap, too.

RB

[hadfield4wd]

I've got an AJP 2 finger clutch lever coming as well as a bleeder screw for the clutch. The one on there is gnarled pretty bad so I just ordered a new one.

I have the original GasGas front headlight as well as the Hebo one on there. Both of them aren't in great shape as far as the mounting. The rubber straps are very dry rotted or broken. The Hebo has 3 and the GG one has 2. And they are far gone and ready to break at any time. So I grabbed a front number plate I had laying around. Not a great fit but it'll work for this weekends ride. I'll need to find a better one ASAP. Any suggestions?





I was thinking something like this.

http://cycraracing.com/cycra-1200-12...-07-rmz-black/

or this.

http://cycraracing.com/cycra-0802-12...-sx-sxf-black/

I also switched the bars to my bar of choice. Renthal RC High Bend and got Emig lock-on grips.

[pscook]

CRF front plate is the preferred choice:

http://www.gasgasrider.org/forum/sho...t=number+plate

[TheLetterJ]

If you want to keep your headlight, the Baja Designs (and I'm sure many others) rubber mounting straps work just as good as OEM and they're about $5 or less a piece.

[hadfield4wd]

Nah don't need the headlight. I'll have to see how the crf matches up with my upper fork guards