GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 07-27-2018, 08:22 PM
Gibnut Gibnut is offline
Member
 
Join Date: Jan 2018
Posts: 65
Default 2018 GG EC250 riders help please.

Anyone got a jetting combo for a post-cut head?

Squish 1.35mm.


__________________
Gas Gas 2018 EC250 Six Days - sold

Last edited by Gibnut; 07-27-2018 at 09:00 PM.
Reply With Quote


  #2  
Old 07-27-2018, 08:53 PM
martg martg is offline
Member
 
Join Date: Oct 2010
Posts: 6
Default

did you ever just trynthe Beta jetting in your gasgas? I used the Beta jetting chart on my 300 gasgas and it run great!
Reply With Quote
  #3  
Old 07-28-2018, 06:12 AM
memphis2857 memphis2857 is offline
Senior Member
 
Join Date: Aug 2011
Posts: 916
Default

I have the RK Tek head running 1.1mm squish and domed for race gas. Currently I’m running VP110 and Amsoil Dominator @50:1. N3CH needle 182m and 42p. Stock Slide slightly cut. Bike is nice and clean from bottom to top


Sent from my iPhone using Tapatalk
Reply With Quote
  #4  
Old 07-28-2018, 07:47 AM
Keg Keg is offline
Senior Member
 
Join Date: Aug 2006
Posts: 304
Default

Put it in a dyno??
__________________
EC300 2019 (11 Gassers owned, many more to go)
Reply With Quote
  #5  
Old 07-28-2018, 09:28 PM
Gibnut Gibnut is offline
Member
 
Join Date: Jan 2018
Posts: 65
Default

All good. Slide was sitting too high in the carb, giving a closed throttle lean condition. Weird, as the bike was idling fine at a/s 1.5.

Rode this morning 14c, 100m ASL, NEDW#3, 42p/175m, a/s 1.5, Motul 710 @ 2% in 98RON.

Smooth, quiet & grunty power all the way. Case closed, nothing to see here, very, very happy this saga is over!

Keg, thanks for your help with TSP/pistons/etc, etc.
__________________
Gas Gas 2018 EC250 Six Days - sold
Reply With Quote
  #6  
Old 08-02-2018, 07:39 AM
Keg Keg is offline
Senior Member
 
Join Date: Aug 2006
Posts: 304
Default

Great to hear it is all sorted.
__________________
EC300 2019 (11 Gassers owned, many more to go)
Reply With Quote
  #7  
Old 08-03-2018, 07:10 AM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,612
Default

Why doesn't your bike spooge anymore? I think you should try another oil again
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
2018 EC250 squish, jetting & pistons Gibnut Enduro Engine - 2 stroke 27 10-17-2018 09:15 AM
TSP head mod - 2018 EC250 Gibnut Enduro Product Reviews 25 08-26-2018 01:11 PM
Gas Gas 2018 EC250 Six Days - 4th ride Gibnut Pictures & Videos 3 02-28-2018 01:07 PM
Gas Gas 2018 EC250 Six Days Gibnut Enduro Product Reviews 14 01-23-2018 01:00 AM
2018 EC250 - Wins first time out! rossi Off Road Racer's Corner 16 03-23-2017 03:34 PM




All times are GMT -5. The time now is 07:03 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org