|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
2018 ec 300 bearings in oil
I've just dropped the oil in my ec 300 and was surprised to find 5 small ball bearings on the magnet in the transmission. I'm hoping if there is damage that gasgas comes to the rescue under warranty however although I have done under a dozen hours, I think it is over 12 months old..
I recovered from acl and mcl surgery so haven't been able to ride much so my bike has been unused for most of the 12 months. I've attached photos for people's opinions of where they are from.. |
#2
|
||||
|
||||
Geez that's odd. I'd take a guess being that small they are either from the power valve governor, the water pump drive or the governor drive.
__________________
'07 EC300 GG '14 TXT250 GG '? 496 CPI Cheetah RZ/RGV hybrid '22 765 Street Triple RS '21 XTrainer '69 Stinger T125 Suzuki '23 TRS 250RR (it's a Trials thing) |
#3
|
||||
|
||||
Scary! Definitely time for the side case to come off.
__________________
WildAzzRacing YouTube channel Trail Riders of Southern AZ club AZ State Parks OHV Ambassador '11 EC250R '98 KDX220 |
#4
|
||||
|
||||
Just put her back together and keep on riding!!
Seriously though, I'd be calling the local dealer (if they are close), and discussing options. They might be able to do it under warranty even though its outside of 12 months in good will. If so they'll probably want to undertake the work themselves, or may be happy for you to do so and then claim the damaged parts. If you just hook into it yourself you may find they won't take part in it. At least if you discuss the problem before hand you'll know where you stand. I'd probably give them a call, tell them what you've found. Express that you are happy to pull the rhs engine cover to investigate yourself and then take it from there. All depends on your situation though.. how much effort to get the bike to the shop vs doing the work yourself etc. Agree with others. Probably from either water pump bearing or powervalve governor. |
#5
|
|||
|
|||
__________________
EC300 2019 (11 Gassers owned, many more to go) |
#6
|
||||
|
||||
Not "the others ". . . Just me. I'm like a Sensei guru.
Or just a drunkard. Actually it's probably more the latter. . .
__________________
'07 EC300 GG '14 TXT250 GG '? 496 CPI Cheetah RZ/RGV hybrid '22 765 Street Triple RS '21 XTrainer '69 Stinger T125 Suzuki '23 TRS 250RR (it's a Trials thing) |
#7
|
|||
|
|||
thanks all for the input. Ill speak to the dealer on Monday. Its weird because it was a total shock to me as the bike was still performing like there was nothing wrong. Probably a good sign I suppose. Anyway, tomorrows ride is no longer going to happen. Will update when I find out where they are from.
thanks Josh |
#8
|
||||
|
||||
F5 and the other f5!!
I'll be watching for an update on this.. poor bike. |
#9
|
|||
|
|||
Ok, the dealer has had the bike for a little over 2 weeks n says he doesn't know where they have come from. Think I've been getting the run around. Anyone think I should take it somewhere else? I get the impression that not a lot of effort is being put in.. Lots of ducking n weaving.. Phone calls never returned etc. I'm increasingly suspicious of the water pump impeller bearings. Has anyone had there bike apart and inspected these at all??
Jc |
#10
|
||||
|
||||
I would suspect powervalve governor or the water pump.
I would go down and speak with them in person and ask to see the bike so you know if they done any work to it. Maybe contacting GG about it might light a fire under the dealer's rear?
__________________
WildAzzRacing YouTube channel Trail Riders of Southern AZ club AZ State Parks OHV Ambassador '11 EC250R '98 KDX220 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2018 | Stoby | General Discussions & Announcements | 23 | 04-18-2018 04:07 PM |
New 2018 300 | markwoodlief | Enduro Product Reviews | 31 | 04-18-2018 04:06 PM |
No 200's for 2018' | john r b | General Discussions & Announcements | 5 | 03-24-2018 10:41 PM |
2018 250's | nhgas | General Discussions & Announcements | 1 | 09-22-2017 04:17 AM |
2018 Gas Gas Battery tip | Buddmatto | Enduro Electrical & Wiring | 0 | 09-07-2017 07:21 AM |