Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine 4 stroke (including EFI & Exhaust)

Enduro Engine 4 stroke (including EFI & Exhaust) 4 stroke engine, EFI, and exhaust discussion


Reply
 
Thread Tools Display Modes
  #1  
Old 08-14-2008, 05:58 AM
bergerhag's Avatar
bergerhag bergerhag is offline
Gold Level Site Supporter
 
Join Date: Nov 2006
Location: Timr?, Sweden
Posts: 675
Default FSE Coil-on-plug ohm readouts?

Has anyone got the specs for the primary and the secondary windings on the coil-on-plug assembly for the FSE?

Mine has probably gone bad, and it seems my supplier sent me another bad unit.


Reply With Quote


  #2  
Old 10-20-2008, 03:05 AM
Disco_STu Disco_STu is offline
Member
 
Join Date: Oct 2008
Location: Christchurch, New Zealand
Posts: 10
Default

Hello,
If your 450 is a late model it probably has a Magneti Marelli BAE700 Coil on plug ignition coil. The primary resistance is 0.65 ohms and the secondry is 8.7k ohms.
Looking at the connector on the coil the pin numbering goes from the right to the left. the primary coil is across pins 1 & 3 and the secondry is across 2 and the plug connection.

Stu
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Correct plug? Dunk Enduro Electrical & Wiring 5 07-24-2009 10:33 AM
EC 250 Spark plug Grampy Enduro Engine - 2 stroke 11 12-16-2008 12:24 AM
Coil? bronco-hunter Enduro Electrical & Wiring 0 07-28-2008 06:48 PM




All times are GMT -5. The time now is 03:32 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org