|
Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc. |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
2012 starter gear how much !!!!!
Wow my starter sprocket that sits on the flywheel decided to break last weekend , quick call to gas gas uk and they are trying to relieve me of nearly ?200 just for the sprocket are they mad , does anyone know if there are any cross over parts from another bike that i can buy or am i just kicking it from now on ??
No company can justify charging that for a gear cog its about 50p worth of metal |
#2
|
|||
|
|||
I haven't had this problem yet knock on wood, but maybe check with a machinist shop, probably cost a fair amount depending on the shop and equipment they use, but I doubt it would be $200 in my experience. I had some yamaha hubs turned to accept bearings for my old ktm 620 and I think I only paid $50 for both hubs, but I am also a farmer so they see me more often then I care to admit lol.
|
#3
|
|||
|
|||
Do a search for posts by BobT on here.
His 2011 failed and he found other parts that worked for much less and done a post about it here.
__________________
2014 Sherco SEF 300-R 2014 Sherco ST 300 2013 Sherco X-ride |
#4
|
|||
|
|||
|
#5
|
|||
|
|||
Hi. Look heere total modification cost for all about 100
http://www.gasgasrider.org/forum/showthread.php?t=18583 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2012 Scorpion gear and Homemade PFP adjuster | wence | Enduro Other... | 13 | 06-22-2012 08:49 AM |
2012 XC gear ratios | ggalex | General Discussions & Announcements | 3 | 03-08-2012 09:05 PM |
New Cylinder for 2012 - how will the starter attach? | Keg | General Discussions & Announcements | 6 | 10-22-2011 11:15 PM |
Starter clutch / gear problem | iancp5 | Enduro Engine 4 stroke (including EFI & Exhaust) | 12 | 01-28-2011 02:45 PM |