|
Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc. |
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
Guess I will find out, it was implied that it was a plug and play.
|
#12
|
|||
|
|||
I've had an ignitech on mine for years now, it most certainly is plug and play. If you message them they will put the correct connectors on. I run a pretty aggressive map that works well and compensates well for the 1.5mm base gasket I've got. I love it.
And yes, run a resistor plug and cap and I've also added an earth from the head to the coil (my main earthing point since powder coating)
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear 2016 RM-Z450 |
#13
|
|||
|
|||
Images attached
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear 2016 RM-Z450 |
|
|