|
|
|||||||
| Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
 |
|
|
Thread Tools | Display Modes |
|
#1
12-28-2014, 06:54 PM
|
||||
|
||||
Swing Arm Bushings Install
Brain fart..........didn't take pictures when I took the swingarm apart......question is, which way do the collars on the bushings go??
Inboard? Towards the case? Outbound? Facing frame? I'm about 99.9% sure the collars face onboard up against the "s" brackets that bolt to the frame. Oh.... application is on my 99 EC200 Thanks
__________________
Rick 99 EC 200 06 RM 250 AMA D36 375X OTHG 375S ***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals 
|
|
#2
12-28-2014, 07:02 PM
|
||||
|
||||
|
The flat part of the race faces the engine. A pic is worth a thousand words .
http://partsfinder.onlinemicrofiche....=0&d=-SWINGARM
__________________
 02 EC 200 03 MC 250 88 VT 800 01 TXT 280
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Bearings/Bushings? | carlg | Enduro Suspension | 15 | 05-19-2014 08:04 AM |
| KYB seals and bushings in 48 mm Zokes FYI | Cberg | Enduro Suspension | 7 | 10-24-2012 12:49 PM |
| Sachs 48mm Bushings | Jakobi | Enduro Suspension | 9 | 06-19-2012 07:18 PM |
Linear Mode
