Starter Only engages 1/3 of the time .

[nato]

Where can i get hold of the gaskets to space out my starter system? For the ring gear gap.

[Neil E.]

Originally Posted by nato

Where can i get hold of the gaskets to space out my starter system? For the ring gear gap.

I don't know about the shim supply, maybe a dealer or GoFasters. First try the system with no cover gasket to see how much it changes. The best way is to tape the bendix open and feel for play at the top gear. You want a noticeable back and forth, say not exceeding 1 mm.

If it looks good this way, use silicone on the cover as your sealant. Just make sure the starter motor is relatively vertical. Keep in mind that the starter only drives the upper gear and doesn't have to be perfect. With the cover bolted on, the starter motor should lift up and down (grease the oring). As long as you have some freedom of movement, it should be OK.