Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 02-06-2016, 04:41 AM
barossi73's Avatar
barossi73 barossi73 is offline
Gold Level Site Supporter
 
Join Date: Jan 2014
Posts: 551
Default AS II slide

Question for those who are familiar with running both noz?and ned? needles.
Has anyone tried a half step leaner slide with noz? and how did it compare?
Currently slide6,40(42) nedh#2,175(13 200)
Alternate 6,40 nozh#2,175


__________________
2013 ec200r
Reply With Quote


  #2  
Old 02-06-2016, 07:30 AM
hamilton's Avatar
hamilton hamilton is offline
Gold Level Site Supporter
 
Join Date: Nov 2012
Location: Elkton Md
Posts: 452
Default

6.5 has been the magic number for my 12 200 with AS1 nozh needle.
Johnrb and myself have been using this combo with good results.
Maybe John will chime in with his thoughts.
Your results may vary with the AS2 carb.
__________________
15 GASGAS EC 250
19 Sherco SE 125R
Reply With Quote
  #3  
Old 02-06-2016, 08:53 AM
john r b's Avatar
john r b john r b is offline
Platinum Level Site Supporter
 
Join Date: Aug 2012
Location: Warrenton,Va
Posts: 956
Default

As Ed say's yes this combo work's Great!! But yes we both have the as1.
Thanks again Ed for the jetting advise .
__________________
'12 XC 200 TTX Sold
'15 XC 250E Sale pending
Reply With Quote
  #4  
Old 02-06-2016, 04:08 PM
barossi73's Avatar
barossi73 barossi73 is offline
Gold Level Site Supporter
 
Join Date: Jan 2014
Posts: 551
Default

Thanks for the feedback,sounds like its worth pursuing assuming i can get a slide for a reasonable price.the nedh is working quite well,very progressive and smooth,but lacks that nozh crisp hit that comes right after the nozh burble!
Also i suspect nedh will be a bit thin when the cooler months roll around,and have ruled out clip3 previous.
__________________
2013 ec200r
Reply With Quote
  #5  
Old 02-06-2016, 08:49 PM
barossi73's Avatar
barossi73 barossi73 is offline
Gold Level Site Supporter
 
Join Date: Jan 2014
Posts: 551
Default

Had either of you tried the ned(h) needles prior to the 6.5?
(A slide is goin to sting me around $130nz,the suzuki nedh was $22!)
Hoping someone has tried both setups.
For the record the nedh has smooth progression and much finer control(more usable positions) but just feels a little flat/thin.holds part throttle well.
The nozh feels stronger,but at part throttle it burbles/surges/complains and then explodes into a glorious clean strong hit (i like that bit...a lot!)
__________________
2013 ec200r
Reply With Quote
  #6  
Old 02-07-2016, 03:30 AM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,994
Default

NECH#3 will put you half a clip richer. A fatter pilot/G diameter may give you some of that off idle braap back again, but really its always a trade. What you have said applies true on my 250 as well. Feels like it has a lull in the power curve before it comes on song. Great for small throttle control and input in technical terrain, but almost falls on/off song a bit on faster sections.. particularly if you need to blow some speed off to negotiate rough terrain and then get back on the throttle.
Reply With Quote
  #7  
Old 02-07-2016, 05:03 AM
barossi73's Avatar
barossi73 barossi73 is offline
Gold Level Site Supporter
 
Join Date: Jan 2014
Posts: 551
Default

Thanks jakobi,didnt realise there was a halfclip variation.more food for thought...overall the nedh is quite an improvement,but the thought it could be better still has got me wondering...as you do
__________________
2013 ec200r
Reply With Quote
  #8  
Old 02-07-2016, 01:32 PM
frankinberg's Avatar
frankinberg frankinberg is offline
Platinum Level Site Supporter
 
Join Date: Jul 2012
Location: Brighton colorado
Posts: 264
Default 200 sixdays

Just got a 2011 200 was going to run as1 with rb carb mod has anyone did this
Reply With Quote
  #9  
Old 02-07-2016, 05:43 PM
barossi73's Avatar
barossi73 barossi73 is offline
Gold Level Site Supporter
 
Join Date: Jan 2014
Posts: 551
Default

Most references to the rb carb mod i have seen,seem to also have done the rb head mod (squish)and run the hoh pipe.try search rb carb mod in the search panel above
__________________
2013 ec200r
Reply With Quote
  #10  
Old 02-07-2016, 06:36 PM
frankinberg's Avatar
frankinberg frankinberg is offline
Platinum Level Site Supporter
 
Join Date: Jul 2012
Location: Brighton colorado
Posts: 264
Default 200 carb

Do all the 200s
run as1 carbs or can you run an as2
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
slide # jasont1532 Enduro Intake/Carburetion - 2 stroke 3 04-01-2009 03:13 AM




All times are GMT -5. The time now is 01:34 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org