What did you do to your Gas Gas today?

[Dirt Dud]

Hope to get more done this weekend. She's been sitting for close to a year
__________________
I hope you have had something else to ride !

[n_green]

After smashing my third golf ball light switch thingy I refuse to pay stupid amounts of money for another one. So I wired up a cheap Chinese light switch on the left and put a KTM style starter button/kill switch on the right side. All seems to work very well and even better I now have a kill switch I can actually get to to turn off the bike.






Sent from my iPhone using Tapatalk

[shang]

Looks good! What throttle adjuster is that? Mine is just a brass deal with a rubber cover.

[Simmo737]

Hey Nathan, looks the goods! if you have time can you post up what wires went where? I wanna do the same thing. you probably know this, those kato on off switches can get bumped when you standing and because they latch to "off" they can fully stop progress, to stop this you can take out the latch that keeps the off switch from remaining in, making it less likely to stop the motor completely.

[Jakobi]

What Simmo said. A write up would be ace! My lighting switch block is held together with sikaflex

Shang - Motion Pro T3 cable. It has the ends built into the cable which thread into both the throttle body and the carb.

[n_green]

Originally Posted by shang

Looks good! What throttle adjuster is that? Mine is just a brass deal with a rubber cover.

Motion pro throttle cable. Has captive ends to prevent the cable being pulled out of the housing.

[n_green]

Originally Posted by Simmo737

Hey Nathan, looks the goods! if you have time can you post up what wires went where? I wanna do the same thing. you probably know this, those kato on off switches can get bumped when you standing and because they latch to "off" they can fully stop progress, to stop this you can take out the latch that keeps the off switch from remaining in, making it less likely to stop the motor completely.

Good tip I'll mod the switch so there is no latch cheers.

I did record what each wire did luckily so I'll throw up a write up shortly.

[n_green]

As requested:

http://www.gasgasrider.org/forum/sho...070#post147070

[dps50]

Went to the DMV this morning and got the EC300 plated. Took a ride around town after work.

[jprizz]

Technically I didn't do anything today but... Happy b-day to me, my "gifts" arrived today so I will be doing 'something' soon!