|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Power valve
Hi all, in my quest to get the ec250 running right. a mate said is the power valve sticking. Can I ask what this feels like and have any of you guys had this happen.
So far I have tried. 38 pilot,170 main, n1ed needle #3 42 pilot, 178 main and N1ED needle #3, #2 and #1 38 pilot, 175 main and N1ED needle #2. It tops out at 50mph and seems to cough and spluter. It idle but only just with the adjustment screw nearly spring bound in. It is running std sprockets 14, 48. The starts first kick and reeds are new. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Ec 300 power valve | Jonisaacson17 | Enduro Engine - 2 stroke | 11 | 07-18-2016 09:01 PM |
Power Valve ? | BigAl | Enduro Engine - 2 stroke | 4 | 01-05-2015 09:08 PM |
Loss of power - suspect power valve | Jonny Halls | Enduro Engine - 2 stroke | 4 | 01-22-2013 09:56 AM |
power valve nut | bonkeye | Enduro Engine - 2 stroke | 4 | 10-11-2012 06:40 PM |
Power valve | bens25au | Enduro Engine - 2 stroke | 2 | 02-09-2008 11:02 PM |