|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
98 Brembo Pads?
I am having a real hard time finding which pads for my 98 EC 250 with Brembo brakes. I have some that was told were the ones,but they must be the Nissin. The rear pads are a bit shorter, and the tang is not tall enough to secure the non pin end.
Does anyone remember or know some PN I can order? |
#2
|
||||
|
||||
I'd look for the 92-97 KTM Brembo pads. Calipers are the same.
I would check my 98 GG, but, It is 4 bikes deep in the garage and hard to get to. If you still have trouble, ask here again and I will dig into my box of spares and see if I have a set. Cheers, Jeff |
#3
|
|||
|
|||
OK, So I had some success with the rears today. Drove 60Mi to the local KTM with one of my rear pads.
The EBC FA208R is exact match. I never confirmed the fronts as mine were still good, but I belive the FA181R is the match. not 100% on that Posting for anyone in future that may be google searching |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Old Brembo rear brake for newer EC? | mrfreezer | Enduro Chassis & Body | 0 | 09-08-2017 02:52 AM |
Nissin MC with Brembo caliper? | Tomac | General Discussions & Announcements | 0 | 09-18-2016 05:11 AM |
Brembo Caliper SM Gassers | stian | Enduro Chassis & Body | 4 | 08-04-2014 12:38 PM |
Removal of break pads help 1998 ec250 brembo | Rzez | Enduro Chassis & Body | 3 | 07-21-2014 05:39 PM |
Brembo Brake Parts | savage sausage | General Discussions & Announcements | 4 | 04-17-2012 04:47 PM |