Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Product Reviews

Enduro Product Reviews Feedback & Comments on Products Tested


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 10-29-2017, 06:35 PM
gasgasman's Avatar
gasgasman gasgasman is offline
Super Moderator
 
Join Date: Jul 2006
Location: Pearland Texas
Posts: 4,594
Default 2018 GG XC250 first impression.

2018 GasGas XC 250 first impressions.
I currently have a '15 XC250 and was really torn on getting an '18 GasGas. The '15 has been flawless and performing beautifully.
Anyway, pulled the trigger and got one. Made the 4hr trip to SMS Racing in Denton TX to pick up the bike. Just loading it on the truck, I can tell this this bike is light.
Just looking over the bike, everything has been improved over the '15 bike. The fit and finish is excellent. The frame guards lock into the side panels. The radiator shrouds have in mold graphics.
The air box has NO gaps in the rear fender area. The frame is compact and not over built. The seat has one mounting bolt on the left side, behind the air box cover. A second bolt can be added, you will have to drill and access hols in the right side # plate. Doesn't really need it.
I did the usual bearing greasing, The steering stem bearings and the swing arm pivot were fully greased. (a 1st for me). The swing arm was very easy to remove. Captive bolts on the linkage sped up the process. The pivot linkage is very compact and the seals well thought out. The swing arm pivot bolt has an allen socket fitting, so you can turn the bolt to line it up with the locking tab.
Next on the list was disabling the auto retract side stand. Standard off the shelf orange bike (OB) parts did the trick.
Swapped over the FlexxBars and the steering damper from my '15. The steering damper frame mount had to be modified to clear the GG frame welds.
Installed the battery charge cables from the Optimate LI Ion charger.
Installed the Obie Link guard.
Took the FIM rear tire off. Bike has real rim locks now.
Yesterday we had a trail work day to survey a section of trails after the hurricane Harvey. This was a perfect opportunity for me to run the bike in and see how it does. Lots of stopping , boon-docking and log crossings.
Got to the trail head and set the sag.There's a little triangle moulded in the rear fender as a reference point for setting the sag. See pic below) Filled up the fuel tank. Jetting is OEM. At this point I haven't even ridden the bike.
It was 40F. The e start took a few trys to get going. The rest of the day it was flawless. With the bike in gear, it took an extra second to start. I have never been an e-start fan. Now, I see myself using it all the time. I used the kick start a few times, just to say I did. The bike started 1st kick every time.
Off to the ride.
Took me about 2 miles to get acclimated to the bike. This thing is a dream. The suspension out the box is incredible. There is no fork deflections on the roots. It just soaks everything up. I hit a massive sink hole at speed, the forks bottomed out and floated right on. I would have been over the bars on any other bike. The bike is very well balanced. No porpoising in the whoops.
The motor revs faster and has more power than my '15. It is very smooth and controllable. The clutch is very easy to pull in, action is smooth and linear. No squawking noise! The lever could be shorter. I kept snagging it on brush.
Crossing logs is easier now, the pipe does not hang up.
I had to drag the bike over some big logs, this is where the light weight really shines. I was not expending a whole lot of energy to get the bike lifted.
The clear fuel tank is nice, a quick glance indicates the fuel level.
Overall the bike is slimmer. Slightly taller than my '15.
My boots never got hung up on any body panels.
Right now, I can't find any faults with the bike.
It is truly the best GasGas ever made. And, I've been riding them since 1998.
Sorry for the long review. Hope it helps.

Rear fender suspension sag reference point.


Auto retract side stand delete.


The bike.

Last edited by gasgasman; 10-30-2017 at 08:51 AM.
Reply With Quote
 



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
18 Gas Gas 300 write up impression REVERUP General Discussions & Announcements 4 11-01-2017 06:25 PM
2011 gg 250 second impression mikemoto General Discussions & Announcements 7 01-25-2011 08:01 AM
Dirt Rider Impression 2011 XC250 Clay General Discussions & Announcements 31 11-30-2010 05:43 PM
First Impression's New to me EC250 Ed Ventura General Discussions & Announcements 4 11-29-2009 02:40 PM
First Impression Ed Ventura General Discussions & Announcements 7 05-31-2008 04:48 PM




All times are GMT -5. The time now is 12:39 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org