|
Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Bad idle
Hi,
I have a 2009 EC 300 with JD-KIT. It ran very good until i forgot to take off the cover from the intake used when washing the bike. I tried to start the bike several times. Off course since it got no air, it didn't start, but a whole lot of fuel went through the engine. When I noticed the cover I took it off, put the airfilter on, changed the spark plug and kicked the starter without plug several times. After that I started the engine. When the bike fired up I had a lot of unburned fuel come out the back of the exhaust and it smoked like crazy. Since then I have been on 2 3-4hour rides. The bike works fine except that the idle now is not really adjustable. It varies a lot no matter how i adjust the air screw and idle screw. And the bike stals very easy at lower revs. Any suggestions on what I could do?? |
#2
|
||||
|
||||
Try checking your reeds
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
gas gas won't idle? read this! | ricardo cabeza | Enduro Intake/Carburetion - 2 stroke | 19 | 10-07-2013 01:33 PM |
yet another no idle thread. | stainlesscycle | Enduro Intake/Carburetion - 2 stroke | 86 | 09-03-2011 11:33 AM |
Does not idle or rev | Binni | Enduro Intake/Carburetion - 2 stroke | 8 | 02-14-2011 03:29 PM |
can,t get idle up | geno | Enduro Intake/Carburetion - 2 stroke | 1 | 04-18-2010 08:49 PM |
fasr idle | woody1965 | Enduro Engine - 2 stroke | 1 | 02-26-2010 12:46 PM |