|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
2014 300 muffler - what to get and where to buy
Managed to throw the '14 down a hill and onto a few rocks the other day which bent the q stealth brackets and stinger pipe section. It was centered over the rear wheel when I picked it up. Managed to bend it back sort of but can't get it good as new and it is constantly rubbing the rear wheel. Also as I bent the stinger pipe section I have to use a fair bit of force to force it up and get it to line up with the subframe holes, which results in the stinger pipe itself resting against the shock reservoir cap.
Ill attempt to straighten it some more but past experience has taught me once they're bent they never line up properly again. So what options are out there for me, does the '14 use the same muffler as the '12 & '13? I don't mind the q stealth but it's pretty big and heavy and expensive and sticks out a fair way which is what caused it to be damaged in the first place so a shorter muffler would be ok. I also have NFI where I can buy them. A quick and lazy google doesn't reveal much apart from DEP mufflers on eBay which can be had for A$170. Suggestions welcome.
__________________
Current: 2014 Gas Gas EC300R _____________________________________________ Previous: 2011 Gas Gas EC300 ELC 2004 KTM 300 EXC |
#2
|
|||
|
|||
Hmm so looking at the fmf website the '14 muffler has a different part number to the '13. So I guess the '14 has its own special pipe. Of course it does.
__________________
Current: 2014 Gas Gas EC300R _____________________________________________ Previous: 2011 Gas Gas EC300 ELC 2004 KTM 300 EXC |
#3
|
||||
|
||||
2013 and 2014 look to be the same chasis and pipes etc.
Check the part numbers in the exploded diagrams from the website. Do some comparisons and see if that answers the question. If not, I'm happy enough to do some measuring on the 2013 for ya! |
#4
|
|||
|
|||
2012/2013 bike - muffler/silencer part# BE85000023012
2014 bike - muffler/silencer part# BE87000GG-CBV-2 Definitely different. Bugger.
__________________
Current: 2014 Gas Gas EC300R _____________________________________________ Previous: 2011 Gas Gas EC300 ELC 2004 KTM 300 EXC |
#5
|
|||
|
|||
house of horsepower have nice mufflers, i have one on my 2010 and it sounds nice and works well, it is also much smaller than the q-stealth
there was a post here a few days ago about some they have made for the 2014 bikes, also have a messisco look-a-like header
__________________
2003 txt250 Pro 2013 Ossa 280i |
#6
|
||||
|
||||
What about the frame and subframe part numbers Nath? If they were the same I'd say fair chance the rest will carry over easy enough.
|
#7
|
|||
|
|||
Quote:
2013 # BE120003013 2014 # BE12000CT-CAB-2 Frame: 2013 # BE10000013013 2014 # BE10000CT-CAB-1 So who knows, the part #'s are similar, but different.
__________________
Current: 2014 Gas Gas EC300R _____________________________________________ Previous: 2011 Gas Gas EC300 ELC 2004 KTM 300 EXC |
#8
|
||||
|
||||
I'd say they've changed some naming conventions into 2014. You better load your bike up and head north. We need to get this sorted!
|
#9
|
|||
|
|||
email go fasters - they should be able to get you one - a cannon - for $150 landed - or contact the Aussie importer Jeff at the Christini number, last i heard he was bringing in a a batch
|
#10
|
|||
|
|||
Quote:
Cheers mate I'll give that a shot. You've got a cannon don't you? How do you find it?
__________________
Current: 2014 Gas Gas EC300R _____________________________________________ Previous: 2011 Gas Gas EC300 ELC 2004 KTM 300 EXC |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Raga muffler? | wence | Other GasGas Bikes/Quads | 0 | 08-10-2014 12:13 AM |
muffler options | lonetree | General Discussions & Announcements | 21 | 03-22-2014 05:38 PM |
07 fsr 450 muffler baffles | robbo5 | Enduro Engine 4 stroke (including EFI & Exhaust) | 5 | 03-22-2011 07:01 PM |
EC200 Muffler | iancp5 | Enduro Engine - 2 stroke | 4 | 02-08-2009 06:02 PM |