|
Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
smart carb vendors
Is there any shops that sell the te smart carbs? interested in trying one out, but te's website shows them all out of stock
__________________
2021 Beta 300RR 2014 Gasgas XC300R 2019 850 Pro RMK |
#2
|
||||
|
||||
I believe they are sold directly from them only.
|
#3
|
||||
|
||||
Well, that's disappointing. Ill keep checking their website for stock I suppose
__________________
2021 Beta 300RR 2014 Gasgas XC300R 2019 850 Pro RMK |
#4
|
||||
|
||||
The Smart Carb and Lectron require you to find the correct taper needle that will work in your bike for all load and throttle applications. I think a better option is the STIC metering block for the stock Keihin. The STIC does a much better job of fuel atomization and faster transitional fueling while retaining the ability to adjust individual parts of the fuel curve with stock jets and needles. Each bike is different and requires fine tuning of the carb specifically for the application and rider.
I bought a STIC for my GG 327 big bore at the end of last year and it made a huge difference. I could tell a difference in starting, idle quality, throttle response and top end power. My 327 was jetted well before I installed the STIC and I can honestly say this STIC made a noticeable difference across the board on my bike. I posted my results on Thumpertalk https://thumpertalk.com/forums/topic...ad-stic-xc300/ |
#5
|
||||
|
||||
I feel like I've been under a rock lol, have just recently heard of the STIC... glad you hear your feedback. I'll read your trip report for sure!
My 14 300 is jetted well with a Suzuki needle, but I'm kinda desperate for better fuel mileage since there's no oversize tank available for my bike
__________________
2021 Beta 300RR 2014 Gasgas XC300R 2019 850 Pro RMK |
#6
|
||||
|
||||
I just installed four more STICs in the rest of our GG bikes, (125, 250x2 and 300). I will report back including mpg in 2 weeks after our trip to Tennessee.
|
#7
|
||||
|
||||
Anyone mind guessing which STIC kit I would need for my 14 300 with non-screw top pwk?
I see options for .114 .115 and .116 needle jets. I ride from 3000 to 7000 ' 5 to 30celcius average of 20c I've been using NEDJ and NEDW needles
__________________
2021 Beta 300RR 2014 Gasgas XC300R 2019 850 Pro RMK |
#8
|
||||
|
||||
Contact George Boswell at 1-715-479-7822. George has been very helpful and he is the designer of the STIC.
|
#9
|
|||
|
|||
Quote:
My name is Nathan and I am the VP of Production at SmartCarb Fuel Systems. Happy to answer any questions about the technology. |
#10
|
|||
|
|||
Quote:
The STIC, like other conventional jet/needle carburetors, does not atomize fuel more finely than a metering rod does. And it's a misnomer that a single circuit fuel system can't operate optimally at all throttle positions/loads. The SmartCarb does that very effectively by way of integrated float bowl venting - a feature that neither Lectron nor other carb designs have (patented). And that's just one reason why we're seeing more and more top level racers use it, like Alfredo Gomez last weekend at Ditrocks, Romania: https://www.instagram.com/reel/CusM2...RlODBiNWFlZA== Alfredo_Gomez_Ditrocks_2023.jpg |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Smart Carb finally came!!!! | SpirosZ1000 | Enduro Intake/Carburetion - 2 stroke | 12 | 08-11-2018 11:09 AM |
Smart carb question again | Cox76y | Enduro Intake/Carburetion - 2 stroke | 2 | 01-20-2018 03:58 AM |
Smart Carb | 2stroke | Enduro Intake/Carburetion - 2 stroke | 28 | 05-05-2017 02:07 PM |
Do you want to see a cast smart carb? | gasgas guy | Enduro Intake/Carburetion - 2 stroke | 5 | 01-26-2014 10:01 AM |
Smart carb my review | Diggs345 | Enduro Product Reviews | 9 | 11-28-2012 03:28 PM |