GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Suspension

Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc


Reply
 
Thread Tools Display Modes
  #1  
Old 01-08-2019, 04:05 PM
Upyourkiltbatman's Avatar
Upyourkiltbatman Upyourkiltbatman is offline
Member
 
Join Date: Feb 2015
Location: S,Wales uk
Posts: 55
Default Fork blown

Out on my 15 300 did a big drop off and flat landed and the left fork internals have come out the top of the fork it doesn't look like its stripped any threads but not sure what's gone on , any help appreciated or a parts list of the forks , thanks


__________________
Just need to test it love , only be a hour
Reply With Quote


  #2  
Old 01-08-2019, 10:11 PM
SS109's Avatar
SS109 SS109 is offline
Senior Member
 
Join Date: Jan 2011
Location: Tucson, AZ
Posts: 342
Default

Which forks and we need pics!
__________________
Tucson Dirt Bike Trail Riders Meetup Group
AZ State Parks OHV Ambassador
'11 EC250
'05 EC250 (stolen )
'98 KDX220
Reply With Quote
  #3  
Old 01-08-2019, 11:30 PM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,776
Default

It'll be the 48mm Zokes.. Whole PFP assembly pushed out of cap.
Reply With Quote
  #4  
Old 01-08-2019, 11:33 PM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,776
Default

This thread might help

http://www.gasgasrider.org/forum/showthread.php?t=14224
Reply With Quote
  #5  
Old 01-09-2019, 02:11 AM
SS109's Avatar
SS109 SS109 is offline
Senior Member
 
Join Date: Jan 2011
Location: Tucson, AZ
Posts: 342
Default

On the 48's either the aluminum PFP section broke (most likely) or somehow the circlip failed (highly doubt it).
__________________
Tucson Dirt Bike Trail Riders Meetup Group
AZ State Parks OHV Ambassador
'11 EC250
'05 EC250 (stolen )
'98 KDX220
Reply With Quote
  #6  
Old 01-14-2019, 01:36 PM
Upyourkiltbatman's Avatar
Upyourkiltbatman Upyourkiltbatman is offline
Member
 
Join Date: Feb 2015
Location: S,Wales uk
Posts: 55
Default

Ok first of what does pfp mean , second is that I've tried lots of places to try and get parts to repair fork (think the circlip failed and ballbearing and spring are gone , tried gas gas and said they could not help so it's down to you guys , where do I even get a tool to take the preloaded out ?
__________________
Just need to test it love , only be a hour
Reply With Quote
  #7  
Old 01-14-2019, 06:14 PM
RudolfHucker's Avatar
RudolfHucker RudolfHucker is offline
Senior Member
 
Join Date: Oct 2018
Location: Central UK
Posts: 119
Default

A quick Google brought these guys up. They are in Bradford.

https://www.brooksuspension.co.uk/ma...epair-service/
Reply With Quote
  #8  
Old 01-14-2019, 06:38 PM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,776
Default

If you're not certain and confident in getting into the depths of these forks I'd pay someone to pull them down and report on damage. Be aware you will hit a wall on parts. You may find a set that have worn through coatings etc that you can buy for cheap and poach parts from..

Otherwise, a used set of KYBs are a great alternative!
Reply With Quote
  #9  
Old 01-17-2019, 11:52 PM
Upyourkiltbatman's Avatar
Upyourkiltbatman Upyourkiltbatman is offline
Member
 
Join Date: Feb 2015
Location: S,Wales uk
Posts: 55
Default

Ok. Can't get no help or parts of anyone , gas gas uk no ,suspension people I've tried don't know what I'm on about when I say what's happened and all say they wouldn't be able to get parts. So it down to me. Anyone give me a step by step to disassemble to get to this problem thanks
__________________
Just need to test it love , only be a hour
Reply With Quote
  #10  
Old 01-18-2019, 12:26 AM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,776
Default

I posted the thread above. It'll take some reading along with the manual courtesy of Beta.

Pretty much all the tools are standard. Fork cap tools cross over with KYB 48mm SSS/AOS.

You may find after pulling everything apart you still hit the same wall, so as above I'd start specifically asking if anyone has a set with coating damage that they are willing to let go of.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Blown piston, Power valve Tommy Enduro Engine - 2 stroke 2 05-24-2016 09:46 AM
'13 EC300 Blown Transmission bkoz Enduro Engine - 2 stroke 7 04-22-2015 11:50 AM
head gasket blown out GasgasTom Enduro Engine 4 stroke (including EFI & Exhaust) 1 11-02-2012 01:50 PM
Blown head gasket Jakobi Enduro Engine - 2 stroke 5 08-07-2011 09:28 PM
Radiator / head gasket blown? GavGav Enduro Engine 4 stroke (including EFI & Exhaust) 3 12-05-2008 10:35 PM




All times are GMT -5. The time now is 07:28 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org