|
Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Which wire goes where? 2014 xc 300
I was re-packing my steering bearings today and a couple of the wire harnesses unclipped themselves when I pulled the bars off. Can someone tell me which wire goes in which?
see photo: A = goes to the front brake lever, (black wires). B = goes to switches on the left bar e.g. lights, starter, kill switch, (green and brown wires). C = goes down the main wiring loom of the bike (red and blue with red strip) D = has another small clip attached to it, and also goes down the main wiring loom (green and brown wires) Thanks in advance. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Hot Wire Smell ?? | StuJohnson | Enduro Electrical & Wiring | 2 | 06-16-2013 10:33 AM |
white wire | bonkeye | Enduro Electrical & Wiring | 3 | 04-29-2013 11:54 AM |
Help. Little black wire | Hicksi | Enduro Electrical & Wiring | 12 | 08-19-2011 02:11 PM |
No Yel/Blu wire effect. | cal_tony | Enduro Engine 4 stroke (including EFI & Exhaust) | 8 | 01-12-2009 10:29 AM |
blue and yellow wire | dukbil | Enduro Engine 4 stroke (including EFI & Exhaust) | 1 | 03-16-2007 09:54 AM |