|
Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
36mm AS2
How rare are these carbs. I have one on my 2011 ec250. I have been trying to do as much research as I can on jetting, but there ain?t much for the 36mm on a 250. Any ideas? Pros and cons on the smaller carb? I?d jetting characteristics that different as far as strategy? Thanks guys.
__________________
Brad 2011 Ec250 1982 Land Rover Santana Ligero |
#2
|
||||
|
||||
Not rare per se but kind of rare on Gassers of the era from what I've seen/read.
Benefits are improved throttle response and low end torque over a larger carb. Only negative, IMO, is you can lose some horsepower but that's normally not a big deal as most of us can't use all the power that any modern enduro bike has. As for jetting, it will tend to be smaller on the main than on a 38mm carb as the intake velocity is greater which in turn pulls more fuel up through it.
__________________
WildAzzRacing YouTube channel Trail Riders of Southern AZ club AZ State Parks OHV Ambassador '11 EC250R '98 KDX220 |
#3
|
||||
|
||||
That would explain why I thought my jetting was lean on the main jet at 165. Also why I haven?t seen any reference to the needle that?s in the carb (CGJ). It seems that most everyone that posts has a 38mm carb. Having read through a lot of the database I really couldn?t find much on the 36mm jetting and a 250. Thanks for the info, learning something everyday.
__________________
Brad 2011 Ec250 1982 Land Rover Santana Ligero |
#4
|
|||
|
|||
Ranger is 36mm
The Rangers have a stock PWK 36mm and SmartCarb sells a 36mm carb as well.
https://smartcarb.com/shop/smartcarb...anger-200-300/
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300 "If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut." ―Comedian Lewis Black "I think best when I have a wrench in my hands." Soichiro Honda "Dreams are messages from the deep." -Unknown Sardaukar |
#5
|
||||
|
||||
I actually have a 36mm Smartcarb on my shelf.
__________________
Brad 2011 Ec250 1982 Land Rover Santana Ligero |
#6
|
||||
|
||||
If it was me. I would spend a little more time with the SmartCarb.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
36mm Lectron | Motocrotts | Parts | 0 | 12-27-2019 05:56 PM |
36mm Lectron | daveec250 | Parts | 1 | 11-18-2016 06:58 PM |
36mm Lectron | Terrence R | Enduro Intake/Carburetion - 2 stroke | 16 | 10-05-2015 05:25 AM |
36mm carb | Greenleaf13 | "Wanted to Buy" & "Want To Trade" | 3 | 06-21-2015 02:37 PM |
36mm on 300 | iancp5 | Enduro Intake/Carburetion - 2 stroke | 10 | 11-16-2007 09:23 AM |