|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Need clarification (clutch)
I have been reading a lot of posts about parts interchangeability. Is it correct that all the 250/300/400/450 share the same clutch kit?
|
#2
|
||||
|
||||
Maybe I should give more detail.
I have searched and read many threads on this forum, I am not looking to convert to the "CR" clutch and play with stack heights. My 01 250xc is running fine, but I want to be prepared when I tear down the engine this fall to do the crank bearings. A local shop that I deal with [many KTM's over the years] had ordered a clutch kit for a customer that never came back. Anyway, it is a complete kit in a nifty little "suitcase" and has been on the self for awhile, the label [DP Brakes] on it has these models .... 2008 Gas Gas EC 200 Hobby 2007 Gas Gas EC 200 Hobby 2006 Gas Gas EC 450 FSE 2006 Gas Gas EC 200 Hobby 2005 Gas Gas EC 450 FSE 2004 Gas Gas EC 450 FSE 2003 Gas Gas EC 450 FSE 2003 Gas Gas EC 400 FSE 2002 Gas Gas EC 400 FSE From what I have read [on this forum and part catalogs], the 250/300 models used the same clutch [as well as some 4stroke models] and since they are not on the label I thought I would ask here. Even though he will sell it to me cheap, I don't want to buy it if it will not work. Any help would be much appreciated. Thanks! |
#3
|
||||
|
||||
Should fit, part numbers for clutch plates havent changed since at least 2000. I just downloaded the parts manuals from here http://www.gasgasmotos.es/es/manuales/4.html and compared the part numbers.
|
#4
|
||||
|
||||
Quote:
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
how to fix MOST clutch problems + cr250r clutch conversion. | stainlesscycle | Enduro Engine - 2 stroke | 70 | 10-26-2020 04:06 AM |