Oil Level Plug ???

grtpumpkin · #1 08-27-2011, 10:01 PM

What is the thread size of the oil level plug on a 2005 or 2006 EC250/300?

rgranger · #2 08-27-2011, 10:07 PM

I think 12x1.5 thread. I just bought a couple to use as fillers. will dig up order and where tomorrow.

grtpumpkin · #3 08-27-2011, 10:12 PM

Quote:

Originally Posted by rgranger

I think 12x1.5 thread. I just bought a couple to use as fillers. will dig up order and where tomorrow.

I was hoping it was 10 x 1.0. Wanted add one to my KTM but don't want to drill and tap.

rgranger · #4 08-27-2011, 11:10 PM

Mine has a sight window.

I am very sorry, I think that the inspection weep hole on the KTM is like a 6mm thread with an 8mm head. the filler hole on the GG is 12x1.5thread.

The big filler on the ktm is 12x1.5 and the smaller drain is 10x1, 20nb and 15Nm torque respectively.

grtpumpkin · #5 08-28-2011, 06:35 AM

Quote:

Originally Posted by rgranger

Mine has a sight window.

I am very sorry, I think that the inspection weep hole on the KTM is like a 6mm thread with an 8mm head. the filler hole on the GG is 12x1.5thread.

The big filler on the ktm is 12x1.5 and the smaller drain is 10x1, 20nb and 15Nm torque respectively.

No, the oil check hole on my KTM is 10 x 1.0mm. I had to repair it with a timesert.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to set float level. Revisited.	gasgasman	Enduro Intake/Carburetion - 2 stroke	48	11-10-2018 05:11 AM
Float Level, please explain?	rod	Enduro Intake/Carburetion - 2 stroke	13	02-12-2011 01:03 PM
Zokes oil level?	jostby	Enduro Suspension	2	06-20-2009 11:29 AM
Fork oil level ?	Brian VT	Enduro Suspension	4	03-10-2009 08:57 PM
WP Fork Oil Level	MattR	Enduro Suspension	11	08-02-2006 10:40 AM