Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 10-09-2017, 11:59 PM
Supernovabjt Supernovabjt is offline
Member
 
Join Date: Oct 2017
Location: Hollister, Ca
Posts: 4
Default

There was an issue with the power valve when I first got it. I noticed it rattling pretty bad, so I pulled the covers off to inspect. Sure enough, the guy I got it from lost the bolt that acts as the stop for the actuator arm and replaced it with a button head. I replaced that with the correct bolt and all seems to be good with the valve now, though I have not observed it while running with the cover off. I'll add that to the list of things to check. The jetting issues did not change after that.
Reply With Quote
 



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Lean on top 300 2010 kiwia Enduro Intake/Carburetion - 2 stroke 9 11-26-2012 03:59 AM
Am I rich or lean? pscook Enduro Intake/Carburetion - 2 stroke 6 08-01-2012 10:17 PM
Is this a bit lean or ok Simmo737 Enduro Intake/Carburetion - 2 stroke 7 09-11-2011 05:02 AM
Rich or Lean dickieshep Enduro Intake/Carburetion - 2 stroke 10 07-21-2011 01:33 AM
250MC has gone LEAN! GasMCAndy Enduro Intake/Carburetion - 2 stroke 5 01-30-2011 12:37 PM




All times are GMT -5. The time now is 01:13 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org