|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Technical Bulletin - Crank and Flywheel Nut
Info from GasGas Australia Regarding defective Crank pinion locking nuts and a note about the flywheel nut. See attached PDF
|
#2
|
||||
|
||||
What's the consensus, take the steed back to the dealer or do it yourself?
|
#3
|
|||
|
|||
I received a call from my dealer and brought the bike in. Mine had the wrong nut and the dealer replaced it.
|
#4
|
||||
|
||||
Quote:
I need to check my VIN. Does anyone know if the crank nut has changed over the years? Namely the thread pitch? I have a spare one from around 2013 that I ordered. |
#5
|
||||
|
||||
Quote:
I'll ask about the nut while I'm there. |
#6
|
|||
|
|||
Subscribed.
|
#7
|
||||
|
||||
I dropped the bike off at the dealers yesterday, dealer told me that Gasgas have zero stock of the nut that may need to be replaced. I've since bought one elsewhere should mine need to be replaced.
Jakobi, dealer told me that the nut is the same for the 2013. |
#8
|
||||
|
||||
Why didn't we see any failures on other models if they have been using the same nuts I wonder??
|
#9
|
||||
|
||||
Quote:
It should have the groove cut into the corners. |
#10
|
||||
|
||||
Quote:
Where can I buy one of these 2103 models? |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
KYB technical touch USA website | GG221 | Enduro Suspension | 0 | 06-14-2019 08:03 PM |
Post your hard technical trails here | hawaiidirtrider | Pictures & Videos | 29 | 05-11-2013 12:07 AM |
Please use the Technical Forums for specific questions | MattR | General Discussions & Announcements | 1 | 01-14-2008 07:24 PM |
Website/bulletin board downtime possible. | webmaster | General Discussions & Announcements | 0 | 12-14-2006 03:56 PM |
Bulletin Board Upgrade... | webmaster | General Discussions & Announcements | 0 | 08-27-2006 09:46 PM |