|
|
|||||||
| Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
 |
|
|
Thread Tools | Display Modes |
|
#1
03-10-2014, 08:24 PM
|
||||
|
||||
Ohlins fork size?
I need to replace the fork seals on my 2002 ec300 with a Ohlins FG 012 fork.
Anybody know what size this fork is. It looks like the manual says 46mm??
__________________
Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming... "WOW! What an incredible ride!" 
|
|
#3
03-10-2014, 08:39 PM
|
||||
|
||||
|
Yes, it sure is. Back for more Gas gas fun.
__________________
Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming... "WOW! What an incredible ride!"
|
|
#4
03-10-2014, 08:40 PM
|
||||
|
||||
|
Quote:
__________________
Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming... "WOW! What an incredible ride!"
|
|
#5
03-10-2014, 09:25 PM
|
||||
|
||||
|
Hi Mike!
- I just got off the phone with Les talking old times about you and Rick! :-) Just thinking about ya put a smile on my face.  Les says any 46mm kyb fork seal will work. YZ, etc. Jeff
__________________
|
|
#6
03-10-2014, 09:36 PM
|
||||
|
||||
|
Quote:
__________________
Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming... "WOW! What an incredible ride!"
|
|
#7
03-10-2014, 10:08 PM
|
||||
|
||||
|
Oh man - my brain is going - Mike....
Sounds like a nice ride. Here is a link to the 46mm ohlins fork manual : http://www.gasgasrider.org/Ohlins_forks_gasgas.zip jeff
__________________
|
|
#8
03-11-2014, 12:34 AM
|
||||
|
||||
|
I am doing the same thing on my 03.
Anyone know if the KYB bushings will work. I looked them up on the GoFasters site today and they are $156+ each for the OE! KYB/Showa/WP bushings are around $12-15 each! I got the KYB seal kit from Rob@Synergy the other day, tore them down yesterday and my bushings have seen better days. Thanks for the link on the Ohlins manual. It is slightly different than the one I got with my 300. The compression adjuster is different in my book. I have the "knob" type on mine which seems to indicate 2003 model of the FG012 [as in the link], while the booklet that I have is apparently the '01-02 version.
__________________
2003 GG 300EC/DE [Ohlins] 2001 GG 250XCSOLD Last edited by wrench; 03-11-2014 at 12:35 AM. Reason: added info
|
|
#9
03-11-2014, 12:53 AM
|
||||
|
||||
|
I doubt the bushings will work off of a kyb - I will confirm with Les tomorrow....
The first place I would check is Ohlins USA... www.ohlinsusa.com jeff
__________________
|
|
#10
03-11-2014, 01:25 AM
|
||||
|
||||
|
Thanks, I know it would be a stretch. I am curious as to what Les has to say.
I have been all over OhlinsUSA and our forks do not seem to exist in their online database anymore! I will try to call them in the morning. I appreciate the assistance.
__________________
2003 GG 300EC/DE [Ohlins] 2001 GG 250XCSOLD
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 2011 EC250 fork bleeder size | forgiven | Enduro Suspension | 2 | 08-04-2012 09:56 PM |
| ohlins ttx lock ring cap screw size.any one know? | nambo-trev | Enduro Suspension | 0 | 05-03-2012 10:10 PM |
| Shiver 45 fork seal size. | Ud_luz | Enduro Suspension | 2 | 09-28-2011 01:06 PM |
| '10 Sachs fork bleeder thread size | Bailey28 | Enduro Suspension | 3 | 02-04-2011 03:29 AM |
| ohlins size | boostedte37 | Enduro Suspension | 6 | 12-05-2010 04:51 PM |
Linear Mode
