|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#11
|
||||
|
||||
Cool. Zoom in on the picture I posted of the clutch side with
the gears for the balancer. The drive gear and the balance gear each have a dimple on them. In my picture they are NOT aligned. You have to make sure these two gears are properly aligned or your vibration will be much worse that without any balancer. Don't ask how I know. Cheers, JJ |
#12
|
|||
|
|||
Im not having any luck locating a balance shaft. I wonder if any other two strokes use the identical shaft?
|
#13
|
||||
|
||||
Quote:
I also agree that the shaft in the photo is not timed properly and will run smoother once you align the dots. |
#14
|
|||
|
|||
I think the only way to find the balancer parts these days is obtain them from a quad that is being parted out.
__________________
2011 EC250E |
#15
|
||||
|
||||
Quote:
mixed a gallon can of paint strapped to the seat before I fixed the alignment of the gears. Now you can just about stand a nickle on it's side sitting on the seat while the bike is running. I am sure there is a shaft, gear, etc...etc.... (somewhere) here in the US. Just a matter of finding who has it. Also from a spare motor or someone selling on old bike for parts could be a source. I'll keep an eye out for anything and post back here if I see it. Cheers, Jeff |
#16
|
|||
|
|||
Still trying to locate the parts, ive called a bunch of places but like you said, used off of a blown motor is about my only option
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Counter balancer gear | vaughn | Enduro Engine - 2 stroke | 0 | 09-01-2018 02:31 PM |
What is the part number? | Tukt | Enduro Chassis & Body | 2 | 02-03-2017 09:21 PM |
Wiring loom part number?? | motopsycho87 | Enduro Electrical & Wiring | 0 | 04-15-2016 09:35 AM |
Counter balancer, yeah or neigh? | EricP | Enduro Engine - 2 stroke | 1 | 09-06-2011 04:46 AM |