Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 02-01-2019, 01:11 PM
GASGASCWB GASGASCWB is offline
Senior Member
 
Join Date: Sep 2018
Posts: 101
Default Pro design super cooler!!!

Hi guys.

I bought the PRO DESIGN SUPER COOLER and now I need to install it on my GG EC300 2018.

https://www.prodesignracing.com/super_coolers.htm

I'm not sure which hose he goes in!

The explanatory leaflet reads as follows:

"SUPER COOLER must be installed in upper hot water line." Then cut water line 3-6 inches from return water spigot from head "Note: very important make sure you install in hot water return line."


Can anyone tell me with absolute certainty what this hose is?



Appreciate.


Reply With Quote


  #2  
Old 02-01-2019, 03:01 PM
gasgasman's Avatar
gasgasman gasgasman is offline
Super Moderator
 
Join Date: Jul 2006
Location: Pearland Texas
Posts: 4,594
Default

The hot water return line is on the left side.

You won't gain anything by adding the cooler.
Just creates another place for a coolant leak.
Reply With Quote
  #3  
Old 02-01-2019, 03:28 PM
GASGASCWB GASGASCWB is offline
Senior Member
 
Join Date: Sep 2018
Posts: 101
Default

Quote:
Originally Posted by gasgasman View Post
The hot water return line is on the left side.

You won't gain anything by adding the cooler.
Just creates another place for a coolant leak.
Ok!
Hose #13?
Thanks again.
Reply With Quote
  #4  
Old 02-01-2019, 04:49 PM
gasgasman's Avatar
gasgasman gasgasman is offline
Super Moderator
 
Join Date: Jul 2006
Location: Pearland Texas
Posts: 4,594
Default

The bottom left hose is the return.
Depending on the size of the fitting on the cooler, will determine which hose it goes on.

Usually, those coolers are used for replacing the thermostat housing.
Reply With Quote
  #5  
Old 02-01-2019, 05:29 PM
(F5)'s Avatar
(F5) (F5) is online now
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Wellington New Zealand
Posts: 2,063
Default

Quote:
Originally Posted by GASGASCWB View Post
Ok!
Hose #13?
Thanks again.
So Not 13.

It will look nice and shiny but it doesn't equate to surface area in cool breeze. If it did you'd run 4 of them and take those heavy fragile radiators off.
__________________
'07 EC300 GG
'14 TXT250 GG
'? 496 CPI Cheetah RZ/RGV hybrid
'22 765 Street Triple RS
'21 XTrainer
'69 Stinger T125 Suzuki
'23 TRS 250RR (it's a Trials thing)
Reply With Quote
  #6  
Old 02-02-2019, 06:05 AM
GASGASCWB GASGASCWB is offline
Senior Member
 
Join Date: Sep 2018
Posts: 101
Default

Quote:
Originally Posted by (F5) View Post
So Not 13.

It will look nice and shiny but it doesn't equate to surface area in cool breeze. If it did you'd run 4 of them and take those heavy fragile radiators off.
Not hose #13?
What is correct then?
At no time does the product in question say that it will make the radiator work...
Just say helper the motorcycle cooling system!
I read some feedback from customers who bought and were very happy with the result.
Thank you for your opinion on whether or not the product works, but I just need to know if the correct hose is # 13!

Thanks.
Reply With Quote
  #7  
Old 02-02-2019, 12:58 PM
(F5)'s Avatar
(F5) (F5) is online now
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Wellington New Zealand
Posts: 2,063
Default

13 is the coolest part having come from the radiator. I link you posted instructions says 'upper'.

It would probably do the least harm if you put it on the hose 16 opposite the thermostat.
__________________
'07 EC300 GG
'14 TXT250 GG
'? 496 CPI Cheetah RZ/RGV hybrid
'22 765 Street Triple RS
'21 XTrainer
'69 Stinger T125 Suzuki
'23 TRS 250RR (it's a Trials thing)
Reply With Quote
  #8  
Old 02-02-2019, 08:40 PM
GASGASCWB GASGASCWB is offline
Senior Member
 
Join Date: Sep 2018
Posts: 101
Default

Quote:
Originally Posted by (F5) View Post
13 is the coolest part having come from the radiator. I link you posted instructions says 'upper'.

It would probably do the least harm if you put it on the hose 16 opposite the thermostat.
Thanks (F5)!!!
Reply With Quote
  #9  
Old 02-13-2019, 02:32 PM
Leo's Avatar
Leo Leo is offline
Senior Member
 
Join Date: Sep 2008
Posts: 499
Default

Nambotim models used to come with this in line coolers.
It goes near 16 on your diagram on both sides.
But this ones you got is really small GasGas ones was much bigger.

Had it on my GG and machined a pair for buddy


__________________
www.endurohp.eng.br
Sherco ST300 2015 (Trials)
https://www.instagram.com/leocm74/
Brasil!
Reply With Quote
  #10  
Old 02-13-2019, 10:39 PM
(F5)'s Avatar
(F5) (F5) is online now
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Wellington New Zealand
Posts: 2,063
Default

For effective energy transfer to occur you need a large delta of temperature and lots of area. But it's so hard to get a fair comparative test and so easy to market machined bits.

Edit; just seen Leo pics. Yeah they have some area.
Be nice if weren't shielded by radiator mind.
__________________
'07 EC300 GG
'14 TXT250 GG
'? 496 CPI Cheetah RZ/RGV hybrid
'22 765 Street Triple RS
'21 XTrainer
'69 Stinger T125 Suzuki
'23 TRS 250RR (it's a Trials thing)
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
450 Oil cooler? Dave99 Enduro Engine 4 stroke (including EFI & Exhaust) 1 09-16-2017 07:45 PM
In line cooler. Leo Enduro Chassis & Body 3 08-29-2012 09:26 AM
inline water cooler? nato Enduro Engine - 2 stroke 14 05-15-2012 06:23 PM




All times are GMT -5. The time now is 04:46 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org