|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#11
|
||||
|
||||
Pretty much it has to be the shifter return spring, detent spring, or the kick start return spring. If it isn't one of those then I would say a foreign object somehow got in there. Regardless of what it is, time to get the dealer to make it right.
__________________
WildAzzRacing YouTube channel Trail Riders of Southern AZ club AZ State Parks OHV Ambassador '11 EC250R '98 KDX220 |
#12
|
||||
|
||||
If it was one of those springs, there would be an obvious functional problem with the bike and that does not sound like the situation.
|
#13
|
|||
|
|||
Could it be the power valve linkage retaining clip? The one that holds the socket on the actuator arm to the valve pin?
|
#14
|
||||
|
||||
Yep. I agree. It could.
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#15
|
|||
|
|||
I think you might be onto it. ME72326GG-CEQ-1 the security clip looks like a likely candidate. The importer has been forwarded my photos so we'll see what they come up with.
|
#16
|
||||
|
||||
I think the diameter of that wire is very small. Maybe 1mm +/-
|
#17
|
|||
|
|||
Can confirm that it was a powervalve linkage pin. However, it was not the one that was installed onto my powervalve.... It's still in place.
Further to this the one that was in place wasn't installed correctly!!! If you've got the exhaust off I'd recommend popping the cover off and checking that the top of the clip is pushed back up into the hole in the socket. |
#18
|
||||
|
||||
Is there one at the other end of the power valve arm as well? Behind the inner clutch cover?
__________________
Back on a gassy! 2018 EC300! 🤘 Txt 280 07 to make me feel like a gumby again |
#19
|
|||
|
|||
Just bolted at the bottom and ball and socket at the top with this clip to secure the socket.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Tire Debris - Michelin with Tubliss | Neil E. | Enduro Chassis & Body | 5 | 08-29-2017 11:05 AM |
Hot Wire Smell ?? | StuJohnson | Enduro Electrical & Wiring | 2 | 06-16-2013 10:33 AM |
white wire | bonkeye | Enduro Electrical & Wiring | 3 | 04-29-2013 11:54 AM |
Help. Little black wire | Hicksi | Enduro Electrical & Wiring | 12 | 08-19-2011 02:11 PM |
No Yel/Blu wire effect. | cal_tony | Enduro Engine 4 stroke (including EFI & Exhaust) | 8 | 01-12-2009 10:29 AM |