GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Electrical & Wiring

Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 01-16-2019, 04:36 PM
RudolfHucker's Avatar
RudolfHucker RudolfHucker is offline
Senior Member
 
Join Date: Oct 2018
Location: Central UK
Posts: 154
Default 2018/2019 12v Power Connector

The 2018/2019 EC300 wiring diagramme (owner's manual page 16) shows a 12v power connector as part of the standard wiring loom. It is shown as "Salida 12v". I had assumed that it would be near the rhs radiator for a fan kit in the same way as KTM do. Trail Tech seem to supply wiring that connects directly to the battery for their fan kits.

Has anyone found one as I'll be damned if I can!


Reply With Quote


  #2  
Old 01-16-2019, 09:41 PM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,869
Default

Quote:
Originally Posted by RudolfHucker View Post
The 2018/2019 EC300 wiring diagramme (owner's manual page 16) shows a 12v power connector as part of the standard wiring loom. It is shown as "Salida 12v". I had assumed that it would be near the rhs radiator for a fan kit in the same way as KTM do. Trail Tech seem to supply wiring that connects directly to the battery for their fan kits.

Has anyone found one as I'll be damned if I can!
Quick look at the wiring diamgram. Appears to be the JST connector from the loom into the speedo unit.
Reply With Quote
  #3  
Old 01-17-2019, 01:34 AM
RudolfHucker's Avatar
RudolfHucker RudolfHucker is offline
Senior Member
 
Join Date: Oct 2018
Location: Central UK
Posts: 154
Default

Thanks, Jakobi,

I shall have another look and check with my voltmeter. It would be handy if it's up front as I want it for auxilliary led lights.
Reply With Quote
  #4  
Old 01-19-2019, 05:58 AM
RudolfHucker's Avatar
RudolfHucker RudolfHucker is offline
Senior Member
 
Join Date: Oct 2018
Location: Central UK
Posts: 154
Default

I have had a full check round and no sign at all near the speedo unit.
Reply With Quote
  #5  
Old 01-20-2019, 02:08 AM
Undertow Undertow is offline
Member
 
Join Date: Oct 2018
Posts: 27
Default

Hi

I guess it might be the power feed to the ECU unit. If it is the connector "O" that you a referring to, then it connects to the connector "C". And in the previous page there should be a diagram showing the connector "C" being the power feed to the ECU circuit...
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
EC/GP 300 2018/2019 offset Doc Brown Enduro Suspension 2 09-03-2019 02:46 PM
will 2019 map switch fit 2018 Doc Brown Enduro Electrical & Wiring 13 12-27-2018 08:44 AM
Aftermarket Plastics for 2018/2019 EC Models RudolfHucker Enduro Chassis & Body 0 11-08-2018 07:12 AM
Swingarm Decals GG300 2018/2019 Doc Brown Enduro Chassis & Body 3 10-30-2018 07:37 AM
2018 XC 300 Power Valve adjustment Islander Enduro Engine - 2 stroke 3 07-11-2018 09:44 AM




All times are GMT -5. The time now is 11:37 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org