|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
2009 EC300R 48mm Sachs Fork Seals
Hi There, Is it true that you can fit 2010 honda crf450 fork oil and dust seals to 48mm sachs fork, I have a 2009 ec 300r (racing model) and how much fork oil does every body run. Thanks
|
#2
|
|||
|
|||
I can't answer the first question because I have not had to replace seals since I replaced them with synergyseals (thank god those ss are a real b!tch to fit) in terms of oil I think I am 120mm, but suggest you check the susp settings thread
__________________
2003 txt250 Pro 2013 Ossa 280i |
#3
|
||||
|
||||
Affirmative. The 09 CRF450R onwards (that run the 48mm KYBs - not the showas) will fit the Sachs perfectly. All the seals and bushings will cross over. Back when I last ordered I found the whole kit for $50. Prices have gone up since the Tsnami but if you shop around you might find a bargain.
As for air gap (springs out, fork collapsed) I think specs are between 90-135mm. If you're happy with it as it is now I'd suggest measuring before you drain them out and you'll have a setting to get you back in the ballpark. |
#4
|
|||
|
|||
Thanks, I'll try the Honda seals and experiment with oil height and once soughted will post my settings on the database
|
#5
|
|||
|
|||
Quote:
Rob
__________________
www.synergyseals.com 209-938-9726 Being BOLD is BOLD! However, being confident is certain! Ride with confidence again! Made in the USA |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2009 ec300r fork | andyec300r | Enduro Suspension | 8 | 04-21-2014 06:12 PM |
2009 sachs fork lower pinch bolt | Diggs345 | Enduro Suspension | 2 | 05-21-2012 01:22 PM |
Synery Seals SACHS 18mm shock seals | Synergy-Seals | Enduro Product Announcements | 1 | 09-30-2011 03:33 PM |
2010 Sachs Fork Seals | Bradz | Enduro Suspension | 7 | 01-04-2011 12:06 PM |
Sach Boge 48mm fork info (09 EC300R)??? | Keg | Enduro Suspension | 9 | 10-13-2008 04:57 AM |