Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > General Forums > Mini Gasser 's Corner

Mini Gasser 's Corner GasGas Mini Bike Forum. EC Boy Heaven.


Reply
 
Thread Tools Display Modes
  #1  
Old 02-12-2014, 12:20 PM
roverhybrids roverhybrids is offline
Senior Member
 
Join Date: Mar 2011
Location: Redding, CA
Posts: 385
Default who makes the GasGas txt 50 boy and ec 50 boy engine

can anyone tell me who makes the Gasgas txt 50 boy 50cc engine? this same engine is in the ec 50 boy bikes.
I'm trying to put a larger pipe and a spark arrested silencer.

My guess is that it is a Minarelli am6 cylinder, but not sure on that either.


__________________
2011 GasGas ec300R
2011 GasGas ec200 Six Days
Reply With Quote


  #2  
Old 02-13-2014, 09:26 AM
barkeater's Avatar
barkeater barkeater is offline
Senior Member
 
Join Date: Jul 2006
Location: Moorhead, MN
Posts: 235
Default

Most of the pre-2004 ECBoy 50's are just TXT 50's with a sub frame welded on, fan removed and mx plastics added. The later EC and MC 50's (2005+) were a little different. One of the later models was even air cooled rather than liquid.

I was told they are Moto Minarelli based, but GG customizes the jug themselves and outsources the casting. There are some pretty nice performance tweaks that can be made to the motors - I think the guys at Rising Sun are privy to them. They have more experience with the TXT motors than the enduro dealers do.
__________________
Todd A
-------
2003 EC/O 200
Reply With Quote
  #3  
Old 02-13-2014, 09:03 PM
robicon robicon is offline
Senior Member
 
Join Date: Mar 2012
Posts: 152
Default

is that rising sun out of van?
Reply With Quote
  #4  
Old 02-14-2014, 09:28 AM
slocalspode's Avatar
slocalspode slocalspode is offline
Senior Member
 
Join Date: Mar 2007
Location: Southern Kalifornia
Posts: 450
Default

Quote:
Originally Posted by robicon View Post
is that rising sun out of van?
Jim Snell

http://www.trialspartsusa.com/

I believe.

He may or may not want to do direct business with a customer.
Jim prefers you go through one of his dealers.
But he should be able to tell you if he has what you need.
Cheers, Jeff
Reply With Quote
  #5  
Old 02-14-2014, 10:32 AM
roverhybrids roverhybrids is offline
Senior Member
 
Join Date: Mar 2011
Location: Redding, CA
Posts: 385
Default

Quote:
Originally Posted by slocalspode View Post
Jim Snell

http://www.trialspartsusa.com/

I believe.

He may or may not want to do direct business with a customer.
Jim prefers you go through one of his dealers.
But he should be able to tell you if he has what you need.
Cheers, Jeff
I contacted trialspartsusa/rising sun. Not sure if it was Jim I talked to. He didn't have much info and refereed me to trials training center in Tn......
__________________
2011 GasGas ec300R
2011 GasGas ec200 Six Days
Reply With Quote
  #6  
Old 02-15-2014, 11:00 AM
slocalspode's Avatar
slocalspode slocalspode is offline
Senior Member
 
Join Date: Mar 2007
Location: Southern Kalifornia
Posts: 450
Default

Quote:
Originally Posted by roverhybrids View Post
I contacted trialspartsusa/rising sun. Not sure if it was Jim I talked to. He didn't have much info and refereed me to trials training center in Tn......
Well, it was worth a shot.
There was some discussion and some pictures of GasGas 50cc bikes
in this thread.
http://www.gasgasrider.org/forum/sho...?t=2228&page=2

I think GasGas has used several different 50 and 65cc motors going back
to 2000 or so.
I know for sure that the crank case (bottom end) for the ~2002 era 50 and 70cc
motors were made by Franco Morini. As shown in the above thread.
Some of the 50cc motors were air cooled, as in the txt boy model. I think
they were made by Morinni.

I have found no confirmation, but, it is rumored that they also used the
Aprilia AM6 motor at some time.

From the above post. I am also looking for information on the GasGas 50cc
motor in my EC50SM. So far without much luck. I think Franco Morini is
out of business. Herdan has no parts for the Morini MC65 motor that is the
basis for the GG 50SM and 70TXT motor in my post. Also the importer
for Morini, http://www.morinifrancousa.com/ , say they do not have parts
for the MC65 motor. Even though they list it on their web site.

If you already tried Treatland, https://www.treatland.tv/ there is another
source you might try 1977 mopeds, http://www.1977mopeds.com/

As a last resort start calling GasGas dealers,
http://www.gasgas.com/dealers.htm

Adrian and Mandy @ LewisSport have been helpful to me in the past.

Best of luck, Jeff
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Rally Raid UK GasGas and other makes Moto7man General Discussions & Announcements 0 06-22-2013 09:37 AM
Who makes a 250f skid plate forgiven Enduro Chassis & Body 10 08-15-2012 09:37 AM
GasGas engine maintenance schedule... blanc Enduro Engine - 2 stroke 5 07-02-2011 11:42 PM
I hope this movie makes it to the USA einsteingarage General Discussions & Announcements 3 05-09-2011 09:28 PM
makes and models for shiver forks peanutsracing1 Enduro Suspension 3 02-02-2011 05:45 PM




All times are GMT -5. The time now is 03:53 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org