GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Electrical & Wiring

Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc.

Thread Tools Display Modes
Old 04-05-2019, 11:16 PM
Banditpowdercoat Banditpowdercoat is offline
Join Date: Mar 2019
Posts: 30
Default 1998 Stator wattage and info

So I have a 98 EC250 and its been stripped of her lights. I want to add some LED headlights In my bike, the stator has 3 wires. What's in this thread. 2 Yelows and a pink. Originally, the bike was wired a yellow to gnd, Pink to Regulator. Wires were melted and shorted. But I measure the windings and get about same Ohm readings between all. I'm assuming its a Open Delta type of configuration or split phase? Pink being center point, Yellow to pink is X volts and other yellow to pink is also X, where yellow to yellow is XX volts?. What I want to know, is what is the wattage of each winding? if anyone knows. So I can closer match my lighting draw and not have the regulator constantly dumping and over working it.

Also, whats the max wattage of the stock regulator? I don't care that it's AC, I will rectify after. I just want a stable 12v

Bike will not be street legal, just want/need great night vision

Reply With Quote

Old 04-06-2019, 10:36 AM
slocalspode's Avatar
slocalspode slocalspode is offline
Senior Member
Join Date: Mar 2007
Location: Southern Kalifornia
Posts: 405
Default 98 GG Wiring

I have a .xps document file of the Ducati Style wiring diagram.
I don't think it shows the output, but, it shows how the old system
was wired together.
Ya'want it?
Reply With Quote
Old 04-06-2019, 10:55 AM
Banditpowdercoat Banditpowdercoat is offline
Join Date: Mar 2019
Posts: 30

Thx again Jeff. That did help. The stator IS what I thought it was. Wattage now is the TBD part just to be safe. I ended up wiring between the yellows (both windings) as that made the most voltage at idle. But I am leery as to the stock regulator able to dissipate the extra juice. So I'll go back to single winding for my LED's for now until I can verify winding wattage
Reply With Quote
Old 04-07-2019, 08:38 AM
Zman's Avatar
Zman Zman is offline
Platinum Level Site Supporter
Join Date: Apr 2010
Location: Burbs of Chicago
Posts: 1,448

As I recall the wattage was 125W or 150W.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
2014 XC300 R Stator wattage EC_CC_Rider_300 Enduro Electrical & Wiring 5 12-28-2016 01:20 AM
1998 ec 250 darren8724 "Wanted to Buy" & "Want To Trade" 0 11-02-2015 12:15 PM
DIY rewiring for higher wattage kendunn Enduro Electrical & Wiring 1 01-05-2010 02:28 PM
Hi all, should I 1998 EC 250?? Mudwiz General Discussions & Announcements 1 05-27-2007 11:26 AM

All times are GMT -5. The time now is 02:33 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright 2009 -