Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Suspension

Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc


Reply
 
Thread Tools Display Modes
  #1  
Old 10-07-2008, 07:49 AM
Layton Layton is offline
Member
 
Join Date: Oct 2008
Posts: 1
Default Ohlins parts needed

A friend of mine bought a 2004 GasGas 200. When he removed the rear shock he found it had a rattle inside of it so he brought it to me to disassemble and find the rattle.

When I took the shock apart I found that inside the shock reservoir there was a 6 mm screw that was about 2.5 to 3 inches long. The screw was bent kind of like an S.

It appears to me that someone had the shock apart and possibly threaded the screw into the center of the reservoir piston and was using it to set the piston location. I would guess they forgot and left it in there. Once the shock went through it's stroke the screw bent. Then vibration probably just unscrewed it so it came loose from the piston and just rattled around in there.

I've tried to move the piston but it's frozen in place.

Right now I'm guessing that the shock will need a new reservoir and piston.

So, where is the best place in the U.S. to buy individual parts for this shock?

Thanks,

Layton


Reply With Quote


  #2  
Old 10-07-2008, 09:45 AM
PEB PEB is offline
Senior Member
 
Join Date: Aug 2006
Posts: 1,152
Default

I'll sell youthe whole thing, LTR revalved, rebuilt by Motopro in may. Look in the for sale section under parts and part out. Sorry for the plug. I bought soem stuff from OHlins USA they were very helpfull.

Paul
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Ohlins service parts. widebear Enduro Suspension 5 01-08-2010 04:29 PM
Ohlins parts source? widebear Enduro Suspension 2 04-02-2009 01:31 PM
Subframe conversion--what parts are needed Ryno Enduro Chassis & Body 3 01-10-2008 05:01 PM
FAQ Information Needed.... webmaster General Discussions & Announcements 0 08-02-2006 11:28 AM




All times are GMT -5. The time now is 01:30 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org