|
Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
2011 ec300 jetting. 20?c
Right now that the weather got a bit warmer my bike is running rich, plug is black.
Current jetting is 38 PJ, JD blue 3rd clip, 175 MJ. Temps are now 20?c and riding from sea level to 1000ft. I have a few jets to hand that I can use. 38, 40, 42 PJ JD red and blue needles Also a N3cj needle 170 -185 MJ Carb is a 38mm AS2 and everything is in good working order, new piston around 15 hours ago. |
#2
|
||||
|
||||
Where do you feel it's running rich? What throttle positions? Is it exhibiting rich behavior or just has a black plug?
Crude and easy check is to simply lift the clip position and evaluate. |
#3
|
|||
|
|||
It does seem to ride nicely but has the black plug. When you give it a handful it just seems to hesitate a little then the power comes in.
Will lift clip a position and test. Will soon know if any better |
#4
|
|||
|
|||
My 13 is running the N3CJ on the 2nd clip with a 42/178. Damn near perfect in Ohio.
__________________
Dick Carnes "If ya run, you'll only die tired" 2019 EC 300 2018 GP 300 2013 XC 300 (sold) 2006 DE 300 (buddy has it) |
#5
|
|||
|
|||
What's the temp there. I might that needle if I have the time today
|
#6
|
||||
|
||||
If you follow JD needle selection from rich to lean, good chance you'll find a good running combo.
http://www.gasgasrider.org/forum/sho...d+instructions
__________________
15 GASGAS EC 250 19 Sherco SE 125R |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
EC300 2011 Jetting help | Stevel | Enduro Intake/Carburetion - 2 stroke | 7 | 04-20-2015 05:52 PM |
2011 EC300 race jetting | memphis2857 | Enduro Intake/Carburetion - 2 stroke | 19 | 03-03-2015 04:10 PM |
Jetting help -2011 ec300 -UK | Quigs | Enduro Intake/Carburetion - 2 stroke | 20 | 12-06-2014 10:58 AM |
2011 EC300 jetting | ScottyR | Enduro Engine - 2 stroke | 7 | 12-29-2011 04:29 AM |
2011 jetting | mikemoto | General Discussions & Announcements | 7 | 01-22-2011 03:16 PM |