Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > Other Bikes... > Other GasGas Bikes/Quads

Other GasGas Bikes/Quads Trials, Pampera, Wild HP, etc.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 01-06-2018, 07:07 AM
Blambo Blambo is offline
Member
 
Join Date: Mar 2016
Posts: 17
Default Weird brake light problem. Pampera 2-stroke

Hi,

My Pamoera 250 Mk3 and I, despite our advancing years, took part in a 100 mile Long-Distance-trial.
There were a few things requiring attention after many falls in the event, including the brake light being on all the time.
The Rear brake master cylinder had taken a whack, the wires were mashed, so I guessed that was the problem.
I disconnected the wiring from the loom and started her up; brake light still on.
OK, maybe the front brake light switch also has a problem, so I pulled the wire out of the plunger switch.
STILL the brake light comes on whenever the engine runs.
So, check me out here, what am I missing.
BOTH of the switches that can trigger the brake light are disconnected and still the light is on (!!!).
Any pointers most gratefully accepted.
Mike
Reply With Quote
 



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Weird steering problem?? wence Enduro Chassis & Body 13 01-01-2013 06:32 PM
Rear light problem [re-do] Wilksiee Enduro Electrical & Wiring 3 05-04-2012 01:30 PM
I wanted a street legal 2 stroke. How I solved the problem Bobt250 General Discussions & Announcements 11 12-27-2010 02:50 PM
Brake light help loganlexow Enduro Electrical & Wiring 10 07-15-2008 11:13 PM




All times are GMT -5. The time now is 11:07 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org