Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > Other Bikes... > All Other Bikes...

All Other Bikes... KTM, Husky, VOR, Husaberg & Hondayamazuki...


Reply
 
Thread Tools Display Modes
  #121  
Old 08-07-2017, 11:27 AM
Moto7man Moto7man is offline
Member
 
Join Date: Aug 2011
Location: Murfreesboro,Tennessee
Posts: 2,536
Default

New RK Oring chain. I an running a 13/51 Renthal sprocket set and I ordered a 120 link chain. I used a chain breaker to remove about 3 links and I used a chain press to install the new master link. The TM designworks chain guide is wide enough for the oring chain but the stock chain guide is too narrow.




I have a case saver ordered, it should be here on Wednesday. MSR folding shifter fit perfectly. Those are titanium footpegs from a YZF.



I used Oetikier clamps on the cooling hoses, they were very easy to install. I installed the power valve cover with a new oem Honda gasket and some cad bolts, then torqued to spec.







__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300

"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black

"I think best when I have a wrench in my hands." Soichiro Honda

"Dreams are messages from the deep."
-Unknown Sardaukar
Reply With Quote


  #122  
Old 08-07-2017, 11:35 AM
Moto7man Moto7man is offline
Member
 
Join Date: Aug 2011
Location: Murfreesboro,Tennessee
Posts: 2,536
Default

Through the build I used a vet syringe with a brake line fitting to apply Redline assembly lube to each bolt, nut or landing to ensure my torque specs were accurate. The syringe makes application a breeze, keeps things tidy and avoids wasting the assembly lube. I think I could assembly three bikes with one bottle of lube using this method. The lube makes everything go much faster during assembly.



__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300

"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black

"I think best when I have a wrench in my hands." Soichiro Honda

"Dreams are messages from the deep."
-Unknown Sardaukar
Reply With Quote
  #123  
Old 08-07-2017, 11:37 AM
Moto7man Moto7man is offline
Member
 
Join Date: Aug 2011
Location: Murfreesboro,Tennessee
Posts: 2,536
Default

I installed a new Honda pipe mount with two cad bolts and a Honda spring washer to secure the pipe.

__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300

"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black

"I think best when I have a wrench in my hands." Soichiro Honda

"Dreams are messages from the deep."
-Unknown Sardaukar
Reply With Quote
  #124  
Old 08-07-2017, 11:47 AM
Moto7man Moto7man is offline
Member
 
Join Date: Aug 2011
Location: Murfreesboro,Tennessee
Posts: 2,536
Default

I filled the engine with synthetic transmission fluid and filled the radiators with coolant. I did a preliminary adjustment of the Recluse Auto Clutch with the Torque Drive Plate System. I still need to install the carb and pipe and tie up come loose ends, then we can begin the setup. And here is where I am so far.









__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300

"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black

"I think best when I have a wrench in my hands." Soichiro Honda

"Dreams are messages from the deep."
-Unknown Sardaukar
Reply With Quote
  #125  
Old 08-07-2017, 02:37 PM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,994
Default

Looking very nice!!
Reply With Quote
  #126  
Old 08-07-2017, 06:41 PM
pscook's Avatar
pscook pscook is offline
Platinum Level Site Supporter
 
Join Date: Oct 2011
Location: Shoreline, WA
Posts: 1,164
Default

Quote:
Originally Posted by Moto7man View Post
YZ450F rear brake pedal fit great but the stock return spring won't clear the case, I need to find an alternative.
A good friend of mine uses a small block chevy valve spring on the clevis (between the clevis and the master cylinder) as a return spring. Maybe find a small diameter and firm compression spring to wind around the clevis bolt?
__________________
Phil
(New bike pending...)
Reply With Quote
  #127  
Old 08-08-2017, 12:05 AM
Moto7man Moto7man is offline
Member
 
Join Date: Aug 2011
Location: Murfreesboro,Tennessee
Posts: 2,536
Default

Quote:
Originally Posted by pscook View Post
A good friend of mine uses a small block chevy valve spring on the clevis (between the clevis and the master cylinder) as a return spring. Maybe find a small diameter and firm compression spring to wind around the clevis bolt?
Hey, I never thought about that, it's a great idea! Thanks very much!
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300

"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black

"I think best when I have a wrench in my hands." Soichiro Honda

"Dreams are messages from the deep."
-Unknown Sardaukar
Reply With Quote
  #128  
Old 08-08-2017, 12:06 AM
Moto7man Moto7man is offline
Member
 
Join Date: Aug 2011
Location: Murfreesboro,Tennessee
Posts: 2,536
Default

Does anyone know if a a CCK needle and an R1369N needle are the same?
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300

"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black

"I think best when I have a wrench in my hands." Soichiro Honda

"Dreams are messages from the deep."
-Unknown Sardaukar
Reply With Quote
  #129  
Old 08-08-2017, 06:20 AM
Zrt1200 Zrt1200 is offline
Senior Member
 
Join Date: Mar 2016
Location: Mid Michigan
Posts: 199
Default

Quote:
Originally Posted by Moto7man View Post
Does anyone know if a a CCK needle and an R1369N needle are the same?
A CCK is a lot leaner from what Jets R US has posted. Its close to a CGK. Page down in the link.

https://jetsrus.com/a_jets_by_carbur...n_N427-48.html

Try this out as well....

http://www.kyajet.de/?lang=en

Last edited by Zrt1200; 08-08-2017 at 12:37 PM.
Reply With Quote
  #130  
Old 08-08-2017, 09:26 AM
Pete406 Pete406 is offline
Member
 
Join Date: Aug 2008
Location: RI
Posts: 41
Default

Fasst company makes a nice brake return spring! It mounts on the master.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
DC conversion - not floating ground johnm Enduro Electrical & Wiring 39 03-04-2020 11:11 AM
Gas Gas Contact Jt 25 95 Restoration And Help Eyetech General Discussions & Announcements 1 03-18-2016 03:33 PM
2001 XC200 Restoration Project Lincolnlock Enduro Engine - 2 stroke 19 04-22-2014 03:42 PM
Hanging Idle after wide open GasGas Enduro Intake/Carburetion - 2 stroke 10 09-06-2013 04:13 PM
My Stomping ground swazi_matt Ride Reports 10 03-02-2011 09:35 AM




All times are GMT -5. The time now is 01:19 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org