|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Need spring rates for my FSE400- 300lb rider!
OK, Im in need of the proper springs for my new scooter- Ill pretty much be fast trail riding, any advice on rates/set up/parts sources? thanks! -chad
PS- its a 2003 FSE 400EC |
#2
|
||||
|
||||
Quote:
Ok please note I'm guessing but ... 0.48 or 0.50 on the front and if it's the same leverage as the 2 strokes maybe a 6.0 on the back. If you buy them from a suspension specialist or GasGas dealer they should be able to advise you. |
#3
|
|||
|
|||
My XC300 is setup for a 280lb load. I'm running .48 front springs and a 5.9 rear shock spring. A 2 stroke is lighter than a 4 stroke naturally so taking that into consideration along with the additional 20lbs(compared to me) I would shoot for .50/6.0. Call Les at LTR.
__________________
2001 XC 300 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Springs for a 300lb rider. | HAWKWIND | Enduro Suspension | 13 | 10-23-2009 08:12 AM |
07 ec 250-300 stock spring rates | widebear | Enduro Suspension | 4 | 04-29-2009 04:49 PM |
spring rates for lars azz, help | mackmack | Enduro Suspension | 5 | 10-25-2007 01:17 PM |
07 EC300 Stock Spring Rates? | cladoo | Enduro Suspension | 8 | 04-16-2007 03:43 AM |
Spring rates? | moto520 | General Discussions & Announcements | 2 | 02-10-2007 05:20 AM |