Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine 4 stroke (including EFI & Exhaust)

Enduro Engine 4 stroke (including EFI & Exhaust) 4 stroke engine, EFI, and exhaust discussion


Reply
 
Thread Tools Display Modes
  #1  
Old 12-12-2007, 04:44 PM
ktownrider ktownrider is offline
Member
 
Join Date: Nov 2007
Posts: 16
Default 03 GasGas 450FSE Bogging down, TPS value?

It is starting fine, just running into problems when the bike revs in neutral it will bog down or die at a certain RPM. I have read that this might be because of the TPS, the question is what should the throttle position sensor value be? I have the software and have trimmed it to 55. Any comments on that?


Reply With Quote


  #2  
Old 12-12-2007, 07:35 PM
GasGas's Avatar
GasGas GasGas is offline
Senior Member
 
Join Date: Aug 2007
Location: Nova Scotia, Canada
Posts: 694
Default

Are you sure your not just hitting the rev limiter? It's not that hard to do when parked in nutral.
Reply With Quote
  #3  
Old 12-12-2007, 10:34 PM
ktownrider ktownrider is offline
Member
 
Join Date: Nov 2007
Posts: 16
Default Good Call

I have heard that these bike have revlimiters but I haven't gotten out riding yet since the weather has been terrible. I have the software to tell me what the TPS should be so I just wanted to know the value to make sure it was correct. That could be the solution though since it has no pressure and could build up to revs very quicky. I also ran the diagnostics and it says I have a battery short, "what the hell!!". Sorry, but i am so sick of hearing about Honda 450's and how great they are and now Suzuki is going injected, so I want this bike right before I race it, or else it going to be look at the guy with the knock off jap bike called GasGas. Lets not let this happen. The filter needs to be replaced because it looks terrible, any suggestions on where to get one? Then I am putting the alloy impeller. I might get the MCCT since it comes highly reccomended. It starts nice, a little rough but not as bad as everyone made it out to be. I kinda wanna upgrade all of the starter parts anyway. Let me know if you have any Ideas, I am getting this bike ready for ice racing so please any suggestions would be greatly appreciated. I want a dependable bike that I can thrash in the woods yet get to them legally on the roads. Thanks Guys
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
03 GasGas 450FSE Frustration ktownrider Enduro Engine 4 stroke (including EFI & Exhaust) 9 12-20-2007 11:11 AM
Recommended Oil Type for 04' GasGas 450FSE? Crankin04 Enduro Engine 4 stroke (including EFI & Exhaust) 3 07-12-2007 07:05 PM
Battery for 04' GasGas 450FSE Recommendation? Crankin04 Enduro Other... 1 07-12-2007 07:01 PM




All times are GMT -5. The time now is 01:23 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org