Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine 4 stroke (including EFI & Exhaust)

Enduro Engine 4 stroke (including EFI & Exhaust) 4 stroke engine, EFI, and exhaust discussion


Reply
 
Thread Tools Display Modes
  #1  
Old 05-20-2011, 12:52 AM
BigChina BigChina is offline
Member
 
Join Date: May 2011
Posts: 43
Default ECU gurus???

Ok....does anyone know what the difference between a Magneti Marelli IAW 15P and a Magneti Marelli IAW 15M is??? I have found out that my ECU is dead in my 450FSR, it is the 15P...but cost is $600...but have located a 15P for $200. Just wondering if this is a programming thing?
thanks for any input!!


Reply With Quote


  #2  
Old 05-20-2011, 11:19 AM
Qui-gon's Avatar
Qui-gon Qui-gon is offline
Senior Member
 
Join Date: Dec 2007
Location: Lantana Fl
Posts: 200
Default

The 15m has 2 ignition firing modules and is generally used on 2 cylinder machines It works in closed loop mode with a feedback loop. Your version of the 15p has only one firing module and works in open loop mode. It is possible that with your program chip it will work but the board (15M,P and I think W) are the same circuit board with major hardware differences. Some also have a immobiliser built in. None are a straight swap. The nearest I have seen in the USA is one that fits the Aprillia Atlantic 400 scooter but I have yet to get one cheap enough to buy and check out.
__________________
06 Gas Gas FSE 450 USA
07 Gas Gas FSR 450 UK with motard and dirt wheels

Last edited by Qui-gon; 05-20-2011 at 11:21 AM. Reason: typo
Reply With Quote
  #3  
Old 05-20-2011, 11:40 AM
BigChina BigChina is offline
Member
 
Join Date: May 2011
Posts: 43
Default

Why am I not surprised you have all the answers??? Thanks very much!!
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Need some help from the jetting gurus MattR Enduro Intake/Carburetion - 2 stroke 7 01-29-2008 01:55 PM




All times are GMT -5. The time now is 03:26 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org