Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke
Reload this Page New Clutch cover
Register FAQ Calendar

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 03-01-2012, 03:01 PM
PEB PEB is offline
Senior Member
  
Join Date: Aug 2006
Posts: 1,152
Default New Clutch cover
I have just spent some coin to keep the 07 going. I would love to add a new improved clutch cover from the 12 to round out the improvements and repairs. Anyone know when I can get my hands on one?
Reply With Quote
  #2  
Old 03-01-2012, 04:41 PM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
  
Join Date: Oct 2010
Location: Australia
Posts: 7,994
Default
Quote:
Originally Posted by PEB View Post
I have just spent some coin to keep the 07 going. I would love to add a new improved clutch cover from the 12 to round out the improvements and repairs. Anyone know when I can get my hands on one?
Great idea PEB. I've taken the same path for now. Spent some coin on the 2010 to make it a new bike for 2012. Wanted a 200R/250R and the 250's have all presold off first shipment to Aus and 200R has an unknown delivery time. Done with waiting this year..

I'd love to know if the new brake pedal will work in with the older style frame too.
Reply With Quote
  #3  
Old 03-10-2012, 09:56 AM
Jiikoo811 Jiikoo811 is offline
Member
  
Join Date: Nov 2009
Posts: 82
Default
Quote:
Originally Posted by PEB View Post
I have just spent some coin to keep the 07 going. I would love to add a new improved clutch cover from the 12 to round out the improvements and repairs. Anyone know when I can get my hands on one?
It wont fit...i try put new style clutch cover to my 2009 300ec and no success. Need change also new style clutch i think.
Reply With Quote
  #4  
Old 03-10-2012, 10:33 AM
BIG TOOL BIG TOOL is offline
Member
  
Join Date: Jul 2006
Location: East Bay, CA
Posts: 67
Default
Try the Rekluow se cover. It's a little bigger than the GASGAS piece. I don't know if it'll work any better though...
Reply With Quote
  #5  
Old 03-12-2012, 10:56 AM
PEB PEB is offline
Senior Member
  
Join Date: Aug 2006
Posts: 1,152
Default
Why didn't it fit? IF the bolt holes are the same it could be spaced out from the side cover with a stack of gaskets.
Reply With Quote
  #6  
Old 03-12-2012, 12:54 PM
Jiikoo811 Jiikoo811 is offline
Member
  
Join Date: Nov 2009
Posts: 82
Default
Quote:
Originally Posted by PEB View Post
Why didn't it fit? IF the bolt holes are the same it could be spaced out from the side cover with a stack of gaskets.
Bolt holes are same, but you need meybe 10pcs gaskets and longer bolts to get new style cover fit. It no make any sence do that? But with new style clutch it will fit i guess.
Reply With Quote
  #7  
Old 03-12-2012, 01:28 PM
swazi_matt swazi_matt is offline
Senior Member
  
Join Date: May 2010
Location: From Swaziland, Now Hamilton New Zealand the “look but don’t touch” enduro heaven
Posts: 2,336
Default
Can anyone confirm if it will fit the 2010/11 clutch? I am sure I heard that it would fit and reduce clutch chirp
__________________
2003 txt250 Pro
2013 Ossa 280i
Reply With Quote
  #8  
Old 01-05-2013, 07:48 AM
Anders's Avatar
Anders Anders is offline
Gold Level Site Supporter
  
Join Date: Nov 2009
Location: Kongsberg, Norway
Posts: 1,116
Default
Quote:
Originally Posted by twowheels View Post
Check and see if the part number cast on the inside has a 'Mg' preceding it.
I had a quick look at my 06 EC200 clutch today. The cover has a "Mg" preceeding the cast in part number, so I guess the magnesium cover is nothing new.

Sent from my OMNIA7 using Board Express
__________________
Anders

"So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie)

2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper
2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper
1998 Bimota Supermono
1986 Duc Mille S2
1975 Guzzi sidecar hack
1961 Morini Corsaro 125
etc
Reply With Quote
Reply



« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
DIY Clutch Cover Gasket unclejosh Enduro Engine - 2 stroke 8 03-22-2012 09:11 AM
RMW Clutch Cover Rod Overstreet Enduro Product Reviews 2 01-24-2011 10:51 AM
Clutch cover gasket ? cbutler Enduro Engine - 2 stroke 3 06-20-2010 11:29 PM
clutch cover gasket to big? rupecopp Enduro Engine - 2 stroke 2 06-10-2008 03:08 AM




All times are GMT -5. The time now is 09:48 PM.

Contact Us - GasGasRider.org - Top

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org