USA sources for Reiger springs, zoke .48s or .50s

[Dingo_ed]

Saw some older post looking for spring sources, did anyone find any in USA.
Or know what springs will fit on the Reigers used on the newer 300's up to 2017s. Maybe KYB, etc?

Anyone know the stock Reiger spring length and ID, with that could possible match something. Just didn't want to pull shock till I have one. Using bike now.

I'm 236 -240 lbs (109 ish kg) no gear / gear 250+ ( 113-115 ish kgs)

Quit racing 10 years ago and slower rider now just to get out, mainly single track, rock, desert goat trails, and tracks (vet) at times.

I'm thinking 6.0 rear spring

On 2017 Zokes 48mm CC forks I'm back and forth 48's or 50's (found local source for these, will run Beta Zoke 48mm CC PFP springs (470mm /44mm ID).

Racetech moto setting says .48 /6.0 but Teknik GasGas calculator says 113kg = .49 /6.2

Better to go heavier on the spring, bump up to the 50kg or just go the 48's?

I'm so limited on funds can't do more than springs right now, don't want to have to do valves. Plus, I need to find the spring for the Reiger.


Currently I run the PFP at about 8 turns in and run the clicker on both ends at the sport recommendations.

Thanks for nay help