GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine 4 stroke (including EFI & Exhaust)

Enduro Engine 4 stroke (including EFI & Exhaust) 4 stroke engine, EFI, and exhaust discussion

Thread Tools Display Modes
Old 04-19-2018, 01:06 AM
Adam_redneck Adam_redneck is offline
Join Date: Dec 2015
Posts: 13
Default Crank sensor 03 FSE400/450

lost spark, fuel pressure, and timed injection.
tracked it down to my crank position sensor.

the part is discontinued, so I searched on Ebay for Magnetti Morelli crank sensor and just looked for a CPS that looked the same.
Apparently FIAT and Mazaratti ise a almost identical sensor from Magnetti Morelli.

I took a shot in the dark and ordered one from the UK and when it arrived it was indeed the same sensor only it was a two wire.

I made jumpers from it to the bike and it fired right up. I cut and spliced the wires from my factory CPS to the new and even the color codes on the wires matched.

Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
FSE400/450 DRZ400 motor Harry "Wanted to Buy" & "Want To Trade" 1 10-25-2016 05:23 PM
Crank Remover and Crank Installer tools for EC250 Fabry Enduro Engine - 2 stroke 5 06-25-2013 08:24 PM
crank sensor locstion ? Vinny Enduro Engine 4 stroke (including EFI & Exhaust) 3 01-30-2012 12:38 PM
FSE400 throttle tube nitroman Enduro Chassis & Body 0 12-22-2007 06:17 AM
Fse400-02 plastic raggamuffin Enduro Chassis & Body 1 01-30-2007 03:34 PM

All times are GMT -5. The time now is 03:27 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright 2009 -