#1121
|
||||
|
||||
Damn I miss Natal!
|
#1122
|
||||
|
||||
Yesterday I put on the studded tires for the winter season. Total it startet raining... Also lubed and greased a litte bit after the mud bath at Gotland. Have to dismantle the link, swingarm and steering bearings for repacking /greasing very soon. Also plan to replace the piston soon, but 200cc B pistons are manufactured by S3 and are out of stock.
Sent fra min E5603 via Tapatalk
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc Last edited by Anders; 11-16-2016 at 03:37 PM. |
#1123
|
|||
|
|||
I can't believe how well they turn even with my fat ass on the bike. Stonking little bike
|
#1124
|
||||
|
||||
Got my HBD number plate graphics installed. On the side plates, I opted for the rhino finish. Looks tough.
Perfect fit and easy installation. Web site is sketchy, doesn't show GasGas bikes. So you have to choose another brand to see what it looks like. They do send you a proof before it goes to print. http://www.hbdmotografx.com/ |
#1125
|
||||
|
||||
Quote:
RB |
#1126
|
||||
|
||||
Mounted my new CrossX Seat cover. Sent fra min E5603 via Tapatalk
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#1127
|
|||
|
|||
I put new rubber - Mitas ef06 yellow front and c18 green back - and most importantly I solved a design flaw on my kyb fork conversion
I use the gg front wheel, seals and bearings and had new axle spacers made up to adapt the yz axle to the gg bearings. I had noted that the axle spacers were not allowing the RHS fork to float along the axle but fitted tight against the fork bottoms and the bearing. I assumed that the guy that made up the spacers had measured everything accurately and now the forks were perfectly aligned and I didn't need to worry about getting the forks lined up. Well I was wrong😄 When the wheel was off I measured everything about 10 times and realized that the fork was being held about 5mm out of alignment by the collar of the spacer so I had a section machined down to create the floating side again. I now have the bike working so much better. Sometimes you need to go with your gut rather than assuming that the experts never make mistakes
__________________
2003 txt250 Pro 2013 Ossa 280i |
#1128
|
||||
|
||||
Quote:
Quote:
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#1129
|
|||
|
|||
I had it before and tried something else. I have now gone back to it and combined with tubliss it hooksUUUUP
I just have to remember to take gyre plugs because the carcass is not very tough but I am not a racer and my current fitness makes me appreciate the puncture repair stops (provided I have my CO2 bombs ... my small pump generally leaves me more exhausted 😩 😄
__________________
2003 txt250 Pro 2013 Ossa 280i |
#1130
|
||||
|
||||
Quote:
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DNF today | Pepperami | Enduro Chassis & Body | 6 | 09-18-2013 11:59 AM |
Got my first GG today! | RonMexico | General Discussions & Announcements | 6 | 02-19-2011 12:39 PM |
Went Riding Today and..... | coolum74 | Enduro Engine 4 stroke (including EFI & Exhaust) | 2 | 11-30-2008 01:12 PM |
HELP! I tried to use my gasgas as a jet ski today! | sammyj18 | General Discussions & Announcements | 19 | 11-21-2008 08:01 PM |
SHNF From Today | Boomhauer | Pictures & Videos | 13 | 10-30-2007 04:18 PM |