|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
help me identify these parts
I was wondering if anyone knew anything about these triple clamps and this stabilizer mount piece. I have seen a stabilizer kit from ohlins that had a similar piece, but nothing else really. These clamps look aftermarket to me, but have no markings at all. They were on my 2000 xc300 when i bought it.
__________________
2000 Gas Gas xc300 |
#2
|
||||
|
||||
That collar looks identical to the collar I had with my Scott's damper on my 2002 XC300. Of course, it would work with the GPR as well, I would assume.
The triple looks aftermarket, with the bolt holes in the top clamps I would say it's drilled for a damper, either a GPR or a Scott's.
__________________
Phil (New bike pending...) |
#3
|
||||
|
||||
I have some Scotts clamps from that year bike and they don't look like that. They are a dark grey color and have distinctive machining marks that are not visible in these pictures. Emig clamps were typically blue but they usually have an Emig identifier on them.
Eric
__________________
2018 GG 300 GP 2014 GG 300 Racing E 2002 ATK 605 Dual Sport 2003 KX/KDX 220 hybrid 2021 Kawasaki KRX 1000 Trail Edition 1974-86 Vintage Can Ams, SWMs, Puchs, etc. |
#4
|
||||
|
||||
The clamps have no marking at all from what i can see. The collar piece/stabilizer mount thing does have a marking but it was where all the chrome chipped off and the only text that i can make out is the remnants of a 2 with a little 11.3 printed behind it in a bubble, i've been looking at scotts dampers and can't find anything that looks similar. i have a feeing if i find what brand of top clamps those are, it will help me find the matching stabilizer.
__________________
2000 Gas Gas xc300 |
#5
|
||||
|
||||
so, anybody know anything bout these parts?
__________________
2000 Gas Gas xc300 |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Can anybody identify these bits? | jerrytlr | General Discussions & Announcements | 17 | 10-14-2013 03:06 PM |
help me identify these parts! | Jeremyxc300 | Enduro Chassis & Body | 15 | 05-28-2013 06:58 AM |
Help identify this drivetrain noise...Please. | Koko | Enduro Engine - 2 stroke | 22 | 09-06-2012 05:10 PM |
Help Identify fork springs? | Harry | Enduro Suspension | 2 | 02-19-2011 09:07 PM |
Newb needs help to identify | williecoyote | General Discussions & Announcements | 4 | 01-05-2008 10:05 AM |