GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Electrical & Wiring

Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 08-10-2017, 09:35 AM
iflybyu iflybyu is offline
Member
 
Join Date: Jul 2017
Posts: 9
Default 2006 EC300 Dash Wiring

Good Morning,

I am in the middle of refurbing a 2006 EC300. The previous owner tore out all the wiring for some reason, cutting all the plugs out, etc....

I have it all running and charging now. I used the sticky above on getting DC without floating ground and worked great. I have all the lighting functioning now but I am stuck with the cut wiring at the dash. I have figured out the status lighting on the sides of the dash, however the 6 wires coming from the center portion of the dash are another issue....

I have the wiring diagram from the manual but I cannot make out the coding for the dash...There are 6 wires: red, black, blue, yellow, green and brown. Can anyone tell me what they are for?

Thanks

Mike


Reply With Quote


  #2  
Old 08-16-2017, 05:42 AM
iflybyu iflybyu is offline
Member
 
Join Date: Jul 2017
Posts: 9
Default

incase anyone else has this issue...

Red is switched power
Blue ground
Green and black are speedo sensor
White and brown I am still unsure about but must have something to do with tach...

Mike
Reply With Quote
  #3  
Old 08-17-2017, 04:00 AM
Caravan Monster's Avatar
Caravan Monster Caravan Monster is offline
Senior Member
 
Join Date: Jun 2010
Location: Northamptonshire, England
Posts: 307
Default

Assuming same model in your region. Yellow wrap around ht lead for rpm (doesn't work that well) . If memory serves, I think the capacitor top left powers the blue backlight.
Attached Images
File Type: jpg speedo_wiring.jpg (125.8 KB, 11 views)
__________________
'00 Montesa Cota 315R
'13 Husaberg TE 300
Reply With Quote
  #4  
Old 08-17-2017, 07:53 AM
iflybyu iflybyu is offline
Member
 
Join Date: Jul 2017
Posts: 9
Default

Thank You. Can you make out what the brown wire is power for?
Reply With Quote
  #5  
Old 08-18-2017, 02:01 AM
Caravan Monster's Avatar
Caravan Monster Caravan Monster is offline
Senior Member
 
Join Date: Jun 2010
Location: Northamptonshire, England
Posts: 307
Default

No problem! Brown is clock. It needs to be wired to a 12v battery because it will flatten smaller batteries in a week or two. I fitted a small battery holder to my old ec just to have use of the clock for time cards and did without the rest of the time. Probably a legacy thing from the 4 stroke gassers with starter batteries from that period, only on a gasgas
__________________
'00 Montesa Cota 315R
'13 Husaberg TE 300
Reply With Quote
  #6  
Old 08-18-2017, 05:34 AM
iflybyu iflybyu is offline
Member
 
Join Date: Jul 2017
Posts: 9
Default

Thanks for your time, much appreciated.

Mike
Reply With Quote
  #7  
Old 08-18-2017, 05:41 AM
iflybyu iflybyu is offline
Member
 
Join Date: Jul 2017
Posts: 9
Default

One last question...well maybe one last question... Does the yellow wire pick up its RPM signal from the firing signal to the coil?

Mike
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
2006 wiring 2stroke Enduro Electrical & Wiring 5 08-18-2016 10:27 PM
2006 ec 250 lights wiring mess 3stepsaheaduk Enduro Electrical & Wiring 1 12-16-2015 11:51 PM
2002 ec300 light wiring and speedo wiring help needed. andy176 Enduro Electrical & Wiring 0 02-04-2014 07:38 AM
2006 EC250/300 Dash silversleeper Enduro Electrical & Wiring 0 12-14-2013 11:31 AM




All times are GMT -5. The time now is 01:20 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org